Setting Examples Using the Set Wizard
MEAS SHAPE (MDL0)
Move the cursor to this line and press the SET
key. A popup menu will appear.
Move the cursor to "RECTANGLE", "X- LINE" or
"Y- LINE" and press the SET key. In this
example, select "RECTANGLE."
For details, see page 3-15 in Function and
Operation.
REFIMG ARE (MDL0)
Move the cursor to this line and press the SET
key. The "SET" line will be highlighted. Press the
SET key again and the "RECTANGLE" setting
7
screen will appear.
Adjust the size of the rectangle by setting
"
UP.L" and "
right corners) in order to establish the reference
image area.
UP.L The upper left corner of the rectangle can be moved up, down, left, and right.
LO.R The lower right corner of the rectangle can be moved up, down, left, and right.
press the SET key to display a cross hair cursor on the screen. Now, move
MOVE
in position, press the SET key to confirm it.
After the position of the rectangle is correct, press the SET key.
LO.R" (upper left and lower
The rectangle can be moved up, down, left, and right. Select "3MOVE" and
the rectangle by pressing the up, down, left, and right arrow keys. When it is
REG COND
SCREEN COND SAVE DETAIL
1REGISTER NO
0 (0 7)
2MEAS SHAPE (MDL0)
RECTANGLE
3REF IMG ARE (MDL0)
SET
4SEARCH ARE (MDL0)
SET
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
RECTANGLE
RESET
1UP. L
(224, 208)
2LO. R
(287, 271)
3MOVE
4REFFERENCE IMG
=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
7-28
RED F C1 BRT
(224, 208) (287, 271)
(216, 200) (295, 279)
RECTANGLE
X-LINE
Y-LINE
RETURN
RED F C1 BRT
X:224 Y:208