Displaying Reports; Table 2-9: Cards > Reports Field Descriptions - Honeywell NetAXS User Manual

2.6.4 Displaying Reports

Use this function to display a report of all cards and card data. You can display the
cards either by the cardholder's last name or by the card number.
Click
Cards > Reports
The Card Reports screen enables you to:
• View card records by the cardholder's last name.
• View card records by the cards' numbers.
:
Steps
1. Click the By Name tab to display the card records by the cardholders' last
2. Click the By Number tab to display the card records by the cards' numbers.
3. Use the descriptions given in the following table to read the card records (see
NetAXS™ Access Control Unit User's Guide, Document 800-00233, Revision A
to display the Card Reports screen.
names.
"Adding New Cards" on page 36 for more information about card data):
Table 2-9: Cards > Reports Field Descriptions
Field Description
Last Shows the cardholder's last name.
First Shows the cardholder's first name.
Card Number Shows the card number.
Site Shows the Site Code number. A Site Code is a
user-configured name that identifies the site, or location, of
the cardholder's access. See
more information about Site Codes. To determine the Site
Code name associated with the Site Code number, click
Configuration > System > Site Codes
Codes tab.
PIN Shows the Personal Identification Number (PIN) for the
card holder. The PIN number has a maximum of six digits.
Shows the access level(s) configured for the cardholder. An
Access Level
access level specifies the time zone, or time schedule, dur-
ing which the card holder can be granted access at a specific
door. See
information about access levels. To determine an access
level's defined hours, click
to display the Access Level Configuration screen.
Configuring via the Web Server
"Site Codes
"Configuring Access Levels" on page 34 for more
Configuration > Access Levels
Maintaining Cards
Tab" on page 9 for
to display the Site
2-41