Honeywell NetAXS User Manual page 32

Configuring via the Web Server
Configuring the System
Table 2-2: Configuration > System > Host/Loop Communications Tab Field
Host/Loop
Loop
2-14 www.honeywell.com
Descriptions (continued)
Setting
Port Number
Time Sync
Baud Rate
Force Baud Reset
Description
Specifies the port number for the Ethernet port
(default is 3001).
Synchronizes the panel's time with the host's
time.
– Causes the panel(s) to be
Enabled
automatically time-synchronized with the
host.
Specifies the transmission rate (bits per
second) among the downstream NetAXS™
panels on the loop. For NetAXS downstream
panels, it is recommended that you select
115,200.
Tells all downstream NetAXS panels to
change to the selected Downstream baud rate.
This saves the user from having to go to each
panel one by one