Tripp Lite B140-004 Specifications

Model #: B140-004
DVI over Cat5 Extender/Splitter, 4-Port Local Transmitter Unit
Description
The B140-004 transmits a DVI-D Single-Link signal to four monitors up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum
distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). An additional DVI port is provided for the connection of a
local monitor. This local DVI port can also be used to daisychain up to 3 units together, allowing for the connection of up to 13 monitors (12 remote,
1 local). Mounting hardware is included that allows the unit to be rackmounted, wallmounted or pole mounted. In addition, up to three units can be
mounted in 1U of rack space using a Tripp Lite
plug and play, with no software or drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Installation is simple. Connect the B140-004 transmitter to a DVI source using a Tripp Lite
Lite B140-series receiver (not included) to each display using a Tripp Lite
connected to an RJ45 port on the B140-004 using a single Cat5e/6 cable.
For longer extension distances, use a
1024 x 768 @ 60Hz signal up to 200 ft..
For shorter extension distances, use a
1024 x 768 @ 60Hz signal up to 100 ft..
Further expand the range and number of monitors by using a
receiver) to each channel of the B140-004, for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) A 1920 x
1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be
extended up to 175 ft..
Package Includes
B140-004 DVI Over Cat5 Extender/Splitter, 4-Port Local Transmitter Unit
1 ft. DVI daisychain cable
Mounting hardware
External power supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
Owner's Manual
Features
Transmit a DVI-D Single-Link signal to four monitors up to 200 ft. away using a single Cat5e/6 patch cable
Highlights
B132-004-RB 19" rackmount bracket. The B140-002 is compatible with all operating systems, and is
B140-1A0 or B140-1A0-WP active receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 150 ft., or a
B140-1P0 or B140-1P0-WP
B140-110
Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
For longer distances - Use a
to extend a 1920 x 1080 @ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz
signal up to 200 ft.
For shorter distances - Use a
unit to extend a 1920 x 1080 @ 60Hz signal up to 50 ft., or a 1024 x 768 @
60Hz signal up to 100 ft.
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to
achieve maximum distance and resolution
Can further expand the range and number of monitors by adding
repeaters
Compatible with all operating systems
Plug and play, no software or drivers required
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule
purchases
P561-Series
P561-Series DVI cable (not included). Finally, each remote receiver is
passive receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 50 ft., or a
repeater unit. Add up to four remote units (three repeaters and one active
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
B140-1A0 or B140-1A0-WP active receiver unit
B140-1P0 or B140-1P0-WP
DVI cable (not included). Connect a Tripp
Tripp Lite
passive receiver
B140-110