Adjust The Exhaust Adaptor; Connecting Ductwork - Maytag UMV1152CA Manual

Installation Instructions
B5.
MOUNT THE MICROWAVE OVEN
(cont.)
Cabinet Front
Cabinet Bottom Shelf
4.
Attach the microwave oven to the top cabinet.
5.
Insert 2 self-aligning screws
through outer top cabinet holes.
Turn two full turns on each screw.
7.
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
8.
Install grease filters. See the Owner's Manual
packed with the microwave.
A – 18
Installation Instructions
Filler Block
Equivalent to
Depth of Cabinet
Recess
Self-Aligning Screw
Microwave Oven Top
6.
Tighten center screw
completely.
16027303
B6.

ADJUST THE EXHAUST ADAPTOR

Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Damper
Blower-Plate
B7.

CONNECTING DUCTWORK

1.
Extend the house duct down to connect to the
exhaust adaptor.
2.
Seal exhaust duct joints using duct tape.
17
Back of
Microwave
For Front-to-Back
Adjustment, Slide the
Exhaust Adaptor as
Needed
House Duct
© 2006 Maytag Services