Bosch 200 Series Manual

Video | AutoDome 200 Series PTZ Camera System
AutoDome 200 Series PTZ Camera System
www.boschsecurity.com
Bosch's AutoDome modular camera system is a
revolutionary new concept in dome cameras. More
than just a series of cameras, it's a dome platform
built around a system of intelligent, interchangeable
modules that allow you to update camera functionality
quickly and cost-effectively. Using common
components lets you install a basic camera system
today and migrate to a more advanced version
tomorrow – without having to replace the entire dome,
thus protecting your initial investment.
Interchangeable modules
The entire AutoDome system is based on five
interchangeable modules: the CPU, camera, housing,
communications, and power supply. Simply swap one
of AutoDome's interchangeable modules and quickly
upgrade from analog to IP, color to day/night, or add
motion tracking. Never before have you had the ability
to adapt a security system to your changing needs this
quickly or inexpensively.
By using the same housing components, all
installations have a consistent look, and observers
have no idea which type of camera (if any) is watching
over them. This unique, modular design also gives you
the flexibility to move cameras between different
Economical, high-speed PTZ dome
u
Fully interchangeable CPUs, cameras, housings,
u
communications, and mounts
18x color camera
u
Optional hybrid operation provides simultaneous
u
analog (coax) and IP connectivity
UTP transmission standard on all analog models
u
housings when special coverage is needed, or as site
plan requirements change. For example, an 18x PTZ
camera over a specific area could easily be "hot-
swapped" to a 26x day/night without removing the
power.
Migrating from a basic dome to one with advanced
features such as AutoTrack II intelligent tracking can
be done quickly and easily, without requiring dome
removal or rewiring. AutoDome's Ethernet
communications module allows you to add IP
functionality while maintaining connectivity to existing
analog inputs and outputs.
200 Series highlights
The AutoDome 200 Series is an economical, high-
speed dome camera that uses a high-performance, 18x
color PTZ camera. The 200 Series supports a variety of
standard and optional video and data transmission
methods, including Bilinx (over coax and UTP), fiber,
and even TCP/IP over Ethernet. Remote control,
configuration, and firmware updates can also be
performed over these cables, offering you unparalleled
control of your cameras.