Bosch NDC-255-P Installation And Operation Manual
Ip dome camera 200 series
Hide thumbs
Also See for NDC-255-P:
- Specifications (2 pages) ,
- Installation and operation manual (98 pages)
Related Manuals for Bosch NDC-255-P
Summary of Contents for Bosch NDC-255-P
- Page 1 IP Dome Camera 200 Series NDC-255-P / NDC-225-P Installation and Operation Manual...
-
Page 3: Table Of Contents
DC power connection Network (and power) connector I/O connector Audio connectors Mounting Camera set-up 3.8.1 Camera positioning 3.8.2 Focal length and focus (NDC-255-P) Resetting the camera 3.10 Closing the unit Browser connection System requirements Establishing the connection 4.2.1 Password protection in camera... - Page 4 Display Stamping Web Interface 6.3.1 Appearance 6.3.2 LIVEPAGE Functions 6.3.3 Logging Camera 6.4.1 Encoder Profile 6.4.2 Encoder Streams 6.4.3 Video 6.4.4 Audio 6.4.5 Installer Options Recording 6.5.1 Storage Management AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
-
Page 5: Ip Camera 200 Series Table Of Contents | En
7.1.3 Digital I/O 7.1.4 System Log / Event Log 7.1.5 Saving snapshots 7.1.6 Recording video sequences 7.1.7 Running recording program 7.1.8 Audio communication Recordings page 7.2.1 Controlling playback Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... - Page 6 | Table of Contents IP Camera 200 Series Troubleshooting Resolving problems Customer service Maintenance Repairs 9.1.1 Transfer and disposal Technical Data 10.1 Specifications 10.1.1 Accessories AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
-
Page 7: Safety
If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, this could result in property damage or risk of damage to the device. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 8: Important Safety Instructions
10. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment. -
Page 9: Fcc & Ices Compliance
Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... - Page 10 (FCC), peut s'avérer utile : How to Identify and Resolve Radio-TV Interference Problems. Cette brochure est disponible auprès du U.S. Government Printing Office, Washington, DC 20402, États-Unis, sous la référence n° 004- 000-00345-4. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
-
Page 11: Ul Certification
Please dispose of these devices at an environmentally compatible recycling facility, per European Directive 2002/96/EC More information For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com Bosch Security Systems Installation and Operation Manual... -
Page 12: Copyrights
Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. This software is based in part on the work of the Independent JPEG Group. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 13: Introduction
It uses H.264 compression technology to give clear images reducing bandwidth and storage.The camera can be used as a stand-alone video surveillance system with no additional equipment or it can easily integrate with the Bosch Divar 700 Series recorders. Features include: –... -
Page 14: Unpacking
Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes. CAUTION! The camera module is a sensitive device and must be handled carefully. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 15: Installation
Using the special screwdriver bit supplied, loosen the two tamper-resistant screws in the dome (the screws remain in place). Remove the dome from the base. Remove the inner liner by pulling it off the base. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 16: Microsdhc Card
Figure 3.1 MicroSDHC card Disassemble the camera. Slide the microSDHC card into the slot. The camera supports most microSD/SDHC cards. For a list of recommended cards (not supplied by Bosch), please visit www.boschsecurity.com AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual... -
Page 17: Power Connection
120 VAC power supply outlet. When power is supplied to the camera the LED on the bottom- front of the camera lights. (This LED can be disabled in the Installer Options menu.) Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 18: Network (And Power) Connector
Use a shielded UTP Category 5e cable with RJ45 connectors. – Power can be supplied to the camera via the Ethernet cable compliant with the Power-over-Ethernet (IEEE 802.3af) standard. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 19: I/O Connector
Relay output switching capability: Max. voltage 24 VAC or 24 VDC. Max. 1 A continuous, 12 VA. – Relay in: Short or +5 VDC activation. – Alarm input configurable as active low or active high. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 20: Audio Connectors
200 mVrms Line out: 16 Ohm min. Line - R 200 mVrms (earphone compatible) Figure 3.5 Audio connectors Connect audio devices to the Line In and Line Out connectors. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 21: Mounting
Attach the camera and base unit securly to the surface using the two supplied M4 screws. CAUTION! Do not point the camera/lens into direct sunlight as this may damage the sensors. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 22: Camera Set-Up
Do not expose them to direct sunlight or bright spotlights in operating and non-operating conditions. Avoid bright lights in the field of view of the camera. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... - Page 23 To obtain a horizontal horizon (for tilted ceilings or sidewall mounting), rotate the base of the lens as necessary to align the picture shown on the monitor. Do not rotate more than 340°. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
-
Page 24: Focal Length And Focus (Ndc-255-P)
IP Camera 200 Series 3.8.2 Focal length and focus (NDC-255-P) Adjust the focal length and focus of the NDC-255-P as follows: To set the field of view of the varifocal lens, loosen the focal length screw and turn the mechanism until the required view is displayed on the monitor (Image goes out of focus.) -
Page 25: Resetting The Camera
Align the LED light guide of the dome with the opening at the front of the mounting base and slot it home. Use the supplied special screwdriver bit to tighten the two tamper-resistant screws. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 26: Browser Connection
The camera must be assigned a valid IP address to operate on your network. The default address pre-set at the factory is 192.168.0.1 Start the Web browser. Enter the IP address of the camera as the URL. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 27: Password Protection In Camera
If the connection is not established, the maximum number of possible connections may already have been reached. Depending on the device and network configuration, up to 25 web browsers, or 50 VIDOS or Bosch VMS connections are supported. 4.2.1 Password protection in camera A camera offers the option of limiting access across various authorization levels. -
Page 28: Connection Established
Refer to Section 7.2 Recordings page, page 90 for more information. 4.4.3 SETTINGS Click SETTINGS in the application title bar to configure the camera and the application interface. A new page containing AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... - Page 29 Section 6 Advanced Mode, page 35 for more information on advanced settings. Note: It is recommended that only expert users or system administrators use the Advanced Mode. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
-
Page 30: Basic Mode
Note: When entering names do not use any special characters, for example &. Special characters are not supported by the internal recording management system. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 31: Device Access
Define and change a separate password for each level while logged in as service or if the device is not protected by a password. Enter the password for the selected level. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 32: Date/Time
Click Sync to PC to apply the system time from your computer to the device. Note: It is important to ensure that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 33: Network
On to activate the automatic acceptance of DHCP-assigned IP addresses. Note: Certain applications (for example, Bosch Video Management System) use the IP address for the unique assignment of the device. If using these applications, the DHCP server must... -
Page 34: Encoder Profile
This page provides general information on the hardware and firmware system, including version numbers. No items can be changed on this page but they can be copied for information purposes when troubleshooting. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 35: Advanced Mode
Note: When entering names do not use any special characters, for example &. Special characters are not supported by the internal recording management system. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 36: General
Assign a camera name to assist in identifying it. The name simplifies the management of multiple devices in more extensive systems, for example the VIDOS or Bosch VMS software. The camera name is used for remote identification, for example, in the event of an alarm. Enter a name that makes it as easy as possible to identify the location unambiguously. -
Page 37: Date/Time
Enter the current date. Since the device time is controlled by the internal clock, it is not necessary to enter the day of the week – it is added automatically. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... - Page 38 If there are empty lines at the bottom of the table, for example after deletions, add new data by marking the row and selecting values from the list boxes. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
-
Page 39: Display Stamping
If the Custom option is selected, enter values in the X and Y position fields. Display milliseconds If necessary, display milliseconds for Time stamping. This information can be useful for recorded video images; however, Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... - Page 40 Select On for the transmitted video images to be watermarked. After activation, all images are marked with a green W. A red W indicates that the sequence (live or saved) has been manipulated. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
-
Page 41: Web Interface
Enter the path for a suitable image for the device logo in this field. The image can be stored on a local computer, a local network, or at an Internet address. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 42: Livepage Functions
The system messages are displayed with the date and time in a field next to the video image and provide information about the establishment and termination of connections, etc. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 43: Logging
File for system log Enter the path for saving the system log here. If necessary, click Browse to find a suitable folder. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 44: Camera
VGA resolution for DSL connections at 500 kbps maximum – ISDN (2B) QVGA resolution for ISDN connections at 100 kbps maximum – ISDN (1B) QVGA resolution for ISDN connections at 50 kbps maximum AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... - Page 45 This maximum data rate is not exceeded under any circumstances. Depending on the video quality settings for the I-frames and P-frames, this can result in individual images being skipped. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
- Page 46 A value of 51 results in a very high refresh rate and lower image quality. Default Click Default to return the profile to the factory default values. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
-
Page 47: Encoder Streams
Click Preview << to close the preview displays. Note: Deactivate the display of the video images if the performance of the computer is adversely affected by the decoding of the data stream. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 48: Video
The green gain adjustment offsets the factory white point alignment to optimize the white point. B-gain The blue gain adjustment offsets the factory white point alignment (reducing blue introduces more yellow). AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 49: Audio
Switch the Audio output On or Off. 6.4.5 Installer Options Disable the Camera LED on the camera to switch it off. Enable Mirror image to obtain a mirror image display of the camera picture. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 50: Recording
MP, T:80Kb, M:100Kb) Note: The recording hours table is only an indication for reference, an actual situation might be different (because of different scenes or networking status for example). AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 51: Storage Management
A Video Recording Manager (VRM) can control all recording when accessing an iSCSI system. The VRM is an external program for configuring recording tasks for video servers. For further information, contact your local customer service at Bosch Security Systems. 6.5.1 Storage Management Device manager... - Page 52 Recording 1 corresponds to stream 1, Recording 2 corresponds to stream 2. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
- Page 53 Click a storage medium in the Managed storage media list to select it. Click Remove below the list. The storage medium is deactivated and removed from the list. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
-
Page 54: Recording Profiles
– Pre-alarm: recording takes place in the pre-alarm time, during the alarm and during the post-alarm time only. – Off: no automatic recording takes place. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 55: Retention Time
VGA for complete frame rate and high image quality. Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 56: Recording Scheduler
Click the date to be deleted. Click OK. The selection is removed from the table and the window is closed. Repeat for any other dates to be deleted. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 57: Recording Status
The graphic indicates the recording activity. An animated graphic is seen when recording is taking place. 6.5.5 Recording Status Details of the recording status are displayed here for information. These settings cannot be changed. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 58: Alarm
Only ten passwords can be defined here. Define a general password if more than ten connections are required, for example, when connections are initiated by a controlling system such as VIDOS or Bosch Video Management System. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual... - Page 59 Decoder in the receiver that is to be used to display the alarm image. Refer to the destination device Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
- Page 60 Select On to automatically re-established a connection to one of the previously specified IP addresses after each reboot, connection breakdown, or network failure. Audio Select On to transmit the audio stream with an alarm connection. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
-
Page 61: Video Content Analyses (Vca)
This can lead to impairment of the VCA system. Observe the processor load and optimize the encoder settings or the VCA settings if necessary, or turn off VCA completely. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 62: Vca Configuration- Profiles
Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... - Page 63 The darker the observation area, the higher the value that must be selected. Minimum object size Specify the number of sensor fields that a moving object must cover to generate an alarm. This setting prevents objects that Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
- Page 64 Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended. Sensitivity and Trigger delay (s) can only be changed if Reference check is selected. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
- Page 65 Activate this function if tampering associated with exposure to extreme light (for instance, shining a flashlight directly on the objective) should trigger an alarm. The average brightness of the scene provides a basis for recognition. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
- Page 66 If the selected area is too homogenous, so that concealing and moving the structure would not trigger an alarm, then an alarm is triggered immediately to indicate the inadequate reference image. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
- Page 67 Right-click any fields to deactivate. Click OK to save the configuration. Click the close button (X) in the window title bar to close the window without saving the changes. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
-
Page 68: Vca Configuration - Scheduled
Assign the individual holidays to the VCA profiles, as described above. Deleting Holidays Delete defined holidays at any time: Click Delete. A new window opens. Click the date to delete. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... - Page 69 IP Camera 200 Series Advanced Mode | en Click OK. The item is deleted from the table and the window closes. The process must be repeated for deleting additional days. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
-
Page 70: Vca Configuration - Event Triggered
A delay period may be useful in avoiding false alarms or frequent triggering. During the delay period, the Silent MOTION+ configuration is always enabled. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 71: Audio Alarm
Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs. Enter a unique and clear name here. Signal Ranges Exclude particular signal ranges in order to avoid false alarms. -
Page 72: Alarm E-Mail
Obtain information on operating your cellphone from your cellphone provider. Attach JPEG from camera Check the box to specify that JPEG images are sent from the camera. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... - Page 73 This makes it easier to identify the origin of the e-mail. Test e-mail Click Send Now to test the e-mail function. An alarm e-mail is immediately created and sent. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
-
Page 74: Interfaces
10 s. Relay follows If required, select a specific event that will trigger the relay. The following events are possible triggers: AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... - Page 75 Trigger relay Click the button to switch the relay manually (for example, for testing purposes or to operate a door opener). Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
-
Page 76: Network
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, activate acceptance of IP addresses automatically assigned to the device. Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the device. If using these... - Page 77 Control Panel of the Windows Control Panel). To limit connections to SSL encryption, set the Off option in the HTTP browser port, the RCP+ port, and Telnet support. This Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
- Page 78 It allows selecting the device via the Internet using a host name, without having to know the current IP address of the device. Enable this service here. To do this, AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
- Page 79 To transfer the IP address of the device, click the Register button. Status The status of the DynDNS function is displayed here for information purposes; these settings cannot be changed. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
-
Page 80: Advanced
Enter the user name that the Radius server uses for the camera in the Identity field. Enter the Password that the Radius server expects from the camera. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 81: Multicasting
Multicast Address Enter a valid multicast address to be operated in multicast mode (duplication of the data stream in the network). With the Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... -
Page 82: Jpeg Posting
Date/time suffix: The date and time are automatically added to the file name. When setting this parameter, ensure that the date and time of the device are always set AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... - Page 83 FTP server password Enter the password that gives access to the FTP server. Path on FTP server Enter an exact path to post the images on the FTP server. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
-
Page 84: Service
The latest firmware can be obtained from your customer service center or from the Bosch Security Systems download area. To update the firmware: First, store the firmware file on your hard disk. - Page 85 Once all files have been successfully uploaded, the device must be rebooted. In the address field of the browser, enter /reset after the camera's IP address, for example: Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
-
Page 86: System Overview
Keep this information at hand when seeking technical support. Select the text on this page with a mouse and copy it so that it can be pasted into an e-mail if required. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 87: Operation Via The Browser
When accessing the camera with a browser, the processor load and network information is available in the upper right of the window next to the Bosch logo. Move the mouse cursor over the icons to display numerical values. This information can help with problem solving or when fine tuning the device. -
Page 88: Image Selection
The storage location depends on the configuration of the camera. 7.1.6 Recording video sequences Sections of the video sequence that is currently being shown on the Livepage can be saved on the computer's hard drive. The AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 89: Running Recording Program
Click the recording icon again to stop recording. Play back saved video sequences using the Player from Bosch Security Systems. 7.1.7 Running recording program The hard drive icon below the camera images on the Livepage changes during an automatic recording. -
Page 90: Recordings Page
1 and 2 are identical, only the quality and locaction may be different.) Figure 7.2 Recordings window Note: Install the BVIP Lite Suite on your PC to ensure that the Recordings page is displayed correctly. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 91: Controlling Playback
Jump to start of active sequence or to previous sequence Jump to start of the next video sequence in the list Slide control Continuously select playback speed by means of the speed regulator: Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05... - Page 92 To do this, place the mouse cursor in the timeline below the timescale and turn the scroll wheel. Playback is automatically stopped (paused) during scrolling. Trick mode requires significantly higher memory capacity and computing power. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
-
Page 93: Troubleshooting
Customer service If a fault cannot be resolved, please contact your supplier or system integrator, or contact Bosch Security Systems Customer Service directly. The Installer should write down all information regarding the unit so that it can be referenced for warranty or repair. The... -
Page 94: Maintenance
Defective or superfluous devices and parts should be disposed of professionally or taken to your local collection point for hazardous materials. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems... -
Page 95: Technical Data
H.264 MP (Main Profile); H.264 BP+ (Baseline Profile Plus); M-JPEG Frame rate 30/25 fps: all resolutions, triple stream Lens type Varifocal 2.8 to 10 mm, F1.2 to close (NDC-255-P) Fixed 4 mm, F1.5 (NDC-225-P) Alarm Input Short or 5 VDC activation Relay Out Switch rating: Max. -
Page 96: Accessories
10% to 80% relative humidity (non-condensing) 10.1.1 Accessories – Archive Player Export License Contact a Bosch representative in your area for the latest available accessories or visit our website at www.boschsecurity.com AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual... - Page 98 Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2010...