GE -3002 Owner's Manual page 27

Self-cleaning radiant ranges
Table of Contents

Advertisement

Problem
Power outage,
clock flashes
Storage drawer
is crooked
Storage drawer
won't close
Oven will not self-clean
Oven starts a self-clean
cycle when you wanted
to bake, roast or broil
"Crackling" or
"popping" sound
Excessive smoking
during a clean cycle
Oven door will
not unlock
CLEAN light flashes
Possible Causes
Power outage or surge.
Rear drawer support is
on top of the guide rail.
Power cord may be
obstructing drawer
in the lower back
of the range.
Rear drawer support is
on top of the guide rail.
The oven temperature
is too high to set a
self-clean operation.
Oven controls improperly set.
Oven door is not in
the locked position.
Oven door locked during
cooking.
This is the sound of the
metal heating and cooling
during both the cooking
and cleaning functions.
Excessive soil.
Oven too hot.
Oven controls not
properly set.
What To Do
• Some models will automatically resume their setting
once the power is restored. On models with a clock,
you must reset the clock. If the oven was in use, you
must reset it by turning the Oven Temperature knob
back to OFF, setting the clock and resetting any
cooking function.
• Reposition the drawer. See the Storage Drawer
Removal instructions in the Care and cleaning of your
range section.
• Reposition the drawer and power cord. See the
Storage Drawer Removal instructions in the Care and
cleaning of your range section.
• Reposition the drawer. See the Storage Drawer Removal
instructions in the Care and cleaning of your range
section.
• Allow the range to cool to room temperature and reset
the controls.
• Make sure you turn the control knob all the way to the
CLEAN position.
• Make sure you move the door latch handle all the
way to the right.
• Turn the Oven Temperature knob to OFF. Allow the
oven to cool. Never force the door latch handle.
• This is normal.
• Turn the Oven Temperature knob to OFF. Open
the windows to rid the room of smoke. Wait until
the CLEAN light goes off. Wipe up the excess soil
and reset the clean cycle.
• Allow the oven to cool below locking temperature.
• Move the door latch handle to the right before
setting the Oven Temperature knob to CLEAN.
GEAppliances.com
27

Advertisement

Table of Contents
loading

Table of Contents