Table of Contents
Advertisement
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
1
Select [Menu] >
press [OK] to confirm.
2
Select an option, then press [OK] to
confirm.
» The setting is saved.
First ring
If you have subscribed to the caller ID service
with your service provider, your phone can
cancel the first ring before the caller ID is
displayed on the screen. After the phone is
reset, it can detect automatically if there is a
caller subscription and start to cancel the first
ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
Turn the first ring on/off
1
Select [Menu] >
press [OK] to confirm.
2
Select [On]/[Off], press [OK] to confirm.
» The setting is saved.
Note
•
To reset the first ring status, go to the reset menu (see
'Restore default settings' on page 33).
Auto clock
Note
•
This service is network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
30
EN
> [Dial mode], then
> [First ring], then
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Select [Menu] >
press [OK] to confirm.
2
Select [On]/[Off]. Press [OK].
» The setting is saved. .
Register additional handsets
You can register additional handsets to the base
station (see 'Register your handset' on page 10).
Unregister handsets
1
If two handsets share the same base
station, you can unregister a handset with
another handset.
2
Select [Menu] >
press [OK] to confirm.
3
Select the handset number to be
unregistered.
4
Press [OK] to confirm.
» The handset is unregistered.
Tip
•
The handset number displays beside the handset name
in standby mode.
Call services
The call services are network and country
dependent. They apply to models with call
services support. Contact your service provider
for more information.
> [Auto clock], then
> [Unregister], then
Advertisement
Table of Contents
