Table of Contents
Advertisement
First ring
If you have subscribed for caller ID service with
your service provider, your phone can suppress
the first ring before the caller ID displays on
the screen. After the phone is reset, it can
detect automatically if the caller ID service
is subscribed and start to suppress the first
ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
Turn the first ring on/off
1
Select [MENU] > [ADVANCED SET] >
[FIRST RING], then press [SELECT] to
confirm.
2
Select [ON]/[OFF], press [SELECT] to
confirm.
The setting is saved.
»
Note
•
To reset the first ring status, go to the reset
menu.
ECO mode
The ECO mode reduces the transmission
power of the handset and base station.
1
Select [MENU] > [ADVANCED SET] >
[ECO], then press [SELECT] to confirm.
2
Select [ON]/[OFF] , then press
[SELECT] to confirm.
The setting is saved.
»
» ECO is displayed in standby mode
Note
•
ECO mode is activated, the
When the
connection range between the handset and
the base station can be reduced.
EN
30
Advertisement
Table of Contents
