Select The Recall Duration; Dial Mode; First Ring; Auto Clock - Philips M888 Extended User Documentation

1
Select [Menu].
2
Press / to select
to confirm.
3
Select [Recall time], then press [OK] to
confirm.
4
Select an option, then press [OK] to
confirm.
» The setting is saved.

Dial mode

Note
•
This feature is country dependent and only applies to
models that support both tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
1
Select [Menu].
2
Press / to select
to confirm.
3
Select [Dial mode], then press [OK] to
confirm.
4
Select an option, then press [OK] to
confirm.
» The setting is saved.

First ring

If you have subscribed to the caller ID service
with your service provider, your phone can
cancel the first ring before the caller ID is
displayed on the screen. After the phone is
reset, it can detect automatically if there is a
caller subscription and start to cancel the first
ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
40 EN
, then press [OK]
, then press [OK]
Turn the first ring on/off
1
Select [Menu].
2
Press / to select
to confirm.
3
Select [First ring], then press [OK] to
confirm.
4
Select [On]/[Off], press [OK] to confirm.
» The setting is saved.
Note
•
To reset the first ring status, go to the reset menu.

Auto clock

Note
•
This service is network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Select [Menu].
2
Press / to select
to confirm.
3
Select [Auto clock], then press [OK] to
confirm.
4
Select [On]/[Off]. then press [OK] to
confirm.
» The setting is saved.

Register additional handsets

You can register additional handsets to the base
station. The base station can register up to 4
handsets.
, then press [OK]
, then press [OK]