Table of Contents
Advertisement
OPTIONS WINDOW
DESCRIPTION
P485 MODBUS TO PROFIBUS CONVERTER – USER GUIDE
In the main window under tools, select options.
Table 4–1: Options window functions
Function
Description
Warning on delete
When something is to be deleted, a warning window will appear.
Warning on unsaved
When closing EnerVista P485/D485 Setup with unsaved data, a
data
warning window will appear.
Show Wizard when
Each time a new configuration is to be made, the Wizard window will
"New" menu is selected
appear.
Language next time the
Select which language the program should use the next time the
program is launched
program is launched. Presently, only English is supported.
Size of log buffer
Set the size of the log buffer (0 to 512 bytes).
Firmware download
Download the firmware to the
Factory restore
Restores the software on the P485 carrier board, to it´s original state.
Block configuration
Use with caution. When this button is pressed, the configuration will
not be accessible and a new configuration has to be downloaded to
the module.
Create error log
Creates an error log file.
Fieldbus configuration
During start-up, the fieldbus interface is initialized to fit the configuration created in the
EnerVista P485/D485 Setup software. Since EnerVista P485/D485 Setup supports both the
P485 and D485 converters, the user must verify that the 'Fieldbus' parameter indicates the
correct converter. Additionally, it is possible for advanced users to customize the network
interface inside the converter to meet specific application demands (see Advanced fieldbus
configuration on page 8–5 for details).
P485
Figure 4-5: Fieldbus configuration
SOFTWARE OVERVIEW
. Use with caution.
4–11
Advertisement
Table of Contents
