Table of Contents
Advertisement
INTRODUCTION
ORDER CODES
MECHANICAL
ELECTRICAL
CHARACTERISTICS
COMMUNICATIONS
ENVIRONMENTAL
EMC COMPLIANCE
1–4
Ordering
The following table illustrates the order codes for the P485 Modbus to Profibus Converter.
Table 1–1: P485 order codes
P485
– *
Base unit
P485
|
C
X
Specifications
HOUSING
Plastic housing with snap-on connection to DIN-rail, protection class IP20
DIMENSIONS
120 mm × 75 mm × 27 mm
L x W x H:
(4.72-in × 2.95-in × 1.06-in)
PROTECTION CLASS
Protection class:
IP20
POWER SUPPLY
Power:
24 V ±10% (for use in class 2 circuits)
POWER CONSUMPTION
Maximum power consumption: 280 mA on 24 V
Typically power consumption: approximately 100 mA
BAUD RATES
Baud rate (Profibus)
9.6, 19.2, 45.45, 93.75, 187.5, and 500 kbps; 1.5, 3, 6, and 12 Mbps
Baud rate (Modbus)
1200, 2400, 4800, 9600, 19200, 38400, and 57600 bps
I/O DATA
I/O input size:
244 bytes
I/O output size:
244 bytes
Total I/O size:
416 bytes
FEATURES AND INTERFACE
Communication profile: Profibus-DP
Supported features:
synchronous, freeze, watchdog
Modbus interface:
RS232, RS422, RS485
Profibus interface:
RS485 (type A or B)
RELATIVE HUMIDITY
The product is designed for a relative humidity of 0 to 95% non-condensing
TEMPERATURE
Operating:
0 to 55°C
Non Operating:
–5 to 85°C
CE-MARK
Certified according to European standards unless otherwise is stated
Emission:
according to EN 50081-2:1993
Immunity:
according to EN 61000-6-2:1999
UL/C-UL COMPLIANCE
This unit is an open type listed by the Underwriters Laboratories.
The certification has been documented by UL in file E214107.
P485 Modbus to Profibus Converter
With configuration cable
No configuration cable
P485 MODBUS TO PROFIBUS CONVERTER – USER GUIDE
Advertisement
Table of Contents
