Emc Compatibility - GE DIGITAL ENERGY 1018959 Installation Manual

1.2

EMC COMPATIBILITY

1-ph SNMP/Web plug-in adapter (P/N 1019070)
1-ph SNMP/Web external adapter (P/N 1019071)
This device has been tested for compliance with the following standards:
•
EN 61000-6-2
•
EN 61000-6-3
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
•
Consult the dealer or an experienced radio/TV technician for help
3-ph SNMP/Web plug-in adapter (P/N 1018959)
SP SNMP/Web plug-in adapter (P/N 23954)
These devices have been tested for compliance with the following standards:
•
EN 61000-6-2
•
EN 61000-6-4
WARNING:
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Modifications reserved
ISG_CNT_SNM_BAS_CRD_1GB_V012.doc
Page 8/24
Installation Guide SNMP/Web Adapter