Access; Web Interface; Troubleshooting; Further Information - GE DIGITAL ENERGY 1018959 Installation Manual

5

ACCESS

5.1

WEB INTERFACE

After the installation and configuration of the SNMP/Web adapter, the connection can be tested with a
web browser.
•
Launch the browser
•
Enter the URL of the SNMP/Web adapter: http://<IP>/ (e.g. http://192.168.24.14/)
•
When prompted, enter username and password (by default, these are set to ge and ge)
•
The SNMP/Web adapter home page will be shown
5.2

TROUBLESHOOTING

If no answer is received from the adapter, verify the adapter installation, cabling and network
configuration. Check the Ethernet connection to the adapter by launching a ping command from a
workstation in the same subnet.
E.g. in a Windows system:
•
Select Run from the Start menu
•
Enter ping <IP> (e.g. ping 192.168.24.14)
•
Verify that the SNMP Card adapter is correctly replying
5.3

FURTHER INFORMATION

For more information, and in order to make full use of all advanced functionalities provided by the
SNMP/Web adapter, refer to the Operating Manual available on the CD-ROM
Modifications reserved
ISG_CNT_SNM_BAS_CRD_1GB_V012.doc
Page 22/24
Installation Guide SNMP/Web Adapter