Connecting The Card; 1-Ph Snmp/Web Plug-In Adapter (P/N 1019070) - GE DIGITAL ENERGY 1018959 Installation Manual

1. Change the front plate with the smaller one delivered with the Kit.
2. Insert the SNMP adapter in the options slot.
3. Fix the front plate of the SNMP adapter to the connectivity box, using the screw included in the
SNMP/Web adapter kit.

3.1.3 Connecting the card

Refer to the architecture detailed in Section 2.4.
Now, the UPS may be switched on (or back to normal mode from manual bypass).
3.2

1-PH SNMP/WEB PLUG-IN ADAPTER (P/N 1019070)

•
Switch off the UPS, and wait approx. 2 minutes or switch the UPS to the manual bypass. In the
latter case, please ensure that the mains input is reliable during this period.
•
Install the SNMP/WEB Interface card in the RS232 option slot. For more details about the slot please
read the UPS user manual.
Modifications reserved
ISG_CNT_SNM_BAS_CRD_1GB_V012.doc
Install procedure for SG Series
Q1
Q2
Connectivity box
P4
Adv. SNMP Card
Protection
Plate
Installation Guide SNMP/Web Adapter
Page 16/24