Honeywell Primus 880 Pilot's Manual page 18

FAIL
NOTE
STB
REACT: RCT
MODE:
STBY
FSBY
WAIT
TEST
WX
WX/T
FLTPLN
GMAP
NOTE: MESSAGES ARE LISTED
IN PRIORITY ORDER.
WI- 880 Weather Radar Indicator Display Screen Features
2 Function Switch
A rotary switch used to select the following functions:
OFF- This position turns off the radar system.
D
SBY (Standby) - This position places the radar system in standby,
D
a ready state, with the antenna scan stopped, the transmitter
inhibited, and the display memory erased. STBY, in white, is shown
in the mode field.
If SBY is selected before the initial RTA warmup period is complete
(approximately 90 seconds), the white WAIT legend is shown in
the mode field. When warmup is complete the system changes the
mode field to STBY.
WX (Weather) - This position selects the WX mode of operation.
D
When WX is selected, the system is fully operational and all internal
parameters are
alphanumerics are white and WX is shown in the mode field.
A28- 1146- 102- 00
PRIMUSr 880 Digital Weather Radar System
TARGET/TARGET ALERT:
ARM (GREEN)
T
ALERT (YELLOW INVERTED VIDEO)
TGT
COLOR BAR:
1 2 3 4 T
V A R !
1 2 3
V A R
1 2 3 4 T
V A R !
Figure 3- 3
set for enroute
TILT ANGLE
ALTITUDE
COMPENSATED
TILT (ACT)
A
ANNUNCIATION
RANGE RING
MARKERS
(120- DEGREE
SCAN SHOWN)
WX CALIBRATED GAIN
WX VARIABLE GAIN
GMAP CALIBRATED GAIN
GMAP VARIABLE GAIN
WX/T CALIBRATED GAIN
WX/T VAR
weather detection.
Operating Controls
AD- 46694- R2@
The
3-3