Table of Contents
Advertisement
OTHER FUNCTIONS
Audio Switching
A2 / Sound Multiplex (TV mode)
• The I/II button in remote control is useful for sound multiplex signal.
Otherwise pressing this button will have no effect.
BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears as shown on right.
Press the I/II button to select the sound to be heard.
Each time the button is pressed,
Sound multiplex signal received
I
STEREO sound broadcast
When a stereo program is received, sound mode display will appear, and you can press the I/II button to select between stereo and
mono sound.
Each time the button is pressed,
When receiving NICAM signals, NICAM display will appear as below.
Sound multiplex signal received
Monaural sound broadcast
When a monaural program is received, sound mode display will appear.
NOTE
• If sound signal is not strong enough for quality reception, press the I/II button until
clear mono sound.
• If sound has hiss noise or keep switching between stereo and mono mode due to signal condition, press the I/II button until
appears on the screen to receive a clear mono sound.
I Language A,
II Language B or
II
Mono or
Stereo appear cyclically on the screen.
Mono appear cyclically on the screen.
appears on the screen to receive a
43
Advertisement
Table of Contents
