Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
Image Menu
TV/Video Mode
Selected characters
Full
16:9 zoom
P. Size
Available for
TV/Composite/S-Video/Component(480i/480p/576i/576p)
signals.
Set Border Color
Off
Noise Reduction
3:2 Pull Down
Reset
(off the function)
PC Mode
Selected characters
Slows the dot clock
phase (shifts slightly
Clock Phase
to left).
Reduces the dot clock
frequency (shrinks the
right side).
Horizontal Clock
Auto Adjust
(off the function)
4:3 Standard
Panoramic
4:3 Zoom
Full
Component(720p/1080i)/HDMI
Black
Gray
Level1
Level2
Level3
Disable
Enable
-
Advances the dot
clock phase (shifts
slightly to right).
Increases the dot
clock frequency
(expands the right
side).
-
Adjust to preference. Please refer to 14 for more detail.
(Not available in Teletext mode)
Adjust to when display 4:3 video.
This turns the gray sidebars to the black sidebars when watching
normal mode screen size area. It is always set to Off when the
monitor powered On. It is recommended to set to Gray to reduce the
panel image retention.
(Not available in Teletext mode)
Adjust to when display static image.
If this is set from Off to Level3, it helps to reduce the noise
interference visible on the static image, especially in the weaker
signal reception areas.
Adjust to improve the picture quality.
The original factory settings for the items of this Menu page can be
restored by pressing the ENTER button.
Setup hint
Adjust for clear character visibility.
Adjust for maximum character clarity.
Pressing the ENTER button, automatic regulation is started.
Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase are
adjusted automatically.
Setup hint
31
Advertisement
Table of Contents
