Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
General Settings
Audio Setup
Option Setup
1. Press the DTT MENU button to display the MENU banner.
2. Use the arrow keys ▲ or ▼ to highlight "General Setting" and press ENTER key on
remote control to show four sub-menus.
3. It will show "Audio Setup", "Option Setup", "Change Pin" and "Local Time".
a. Select the "Audio setup" of the "General Setting" OSD.
a. Select the "Option setup" of the "General Setting" OSD.
b. You may choice PCM or Dolby then press
ENTER key on the remote control.
c. Choice "OK" then the settings will be
saved; if not press "EXIT".
b. Information box timeout: by adjust the
timeout, you may change the time interval
of the menu showing when you press DTT
menu button on the remote control or
doing the channel change.
c. Choice "OK" then the settings will be
saved; if not press "EXIT".
41
Advertisement
Table of Contents
