Troubleshooting The Ir Remote Control - Honeywell HRG4 User Manual

Troubleshooting the IR Remote Control

If this happens ...
The Status indicator does not
turn green and there is still no
response from the remote.
Try this ...
Check the following:
• Ensure that the batteries are properly installed, and that the polarities of the
batteries are not reversed.
• Ensure that the batteries are fresh and are not out of charge.
• Ensure that the IR receiver is not obstructed.
• Ensure that no fluorescent lamp is used nearby.
Solutions | 125
800-12005V1 - A - 08/2012