Status LEDs and Buttons
Operations Panel LEDs and Buttons
Figure 3-2
Figure 3-2
1
1
3
5
7
9
Table 3-2
Operations Panel LEDs
LED Name
ID
Hard drive fault
System health
Fan fault
Power status
Cisco UCS C460 Server Installation and Service Guide
3-4
shows the operations panel LEDs and buttons.
Operations Panel LEDs and Buttons
3
5
8
2
4
6
7
9
ID LED
Hard drive fault LED
Fan fault LED
Power button
NMI button
State
•
Off—The ID LED is not in use.
•
Blue and blinking—System ID is active via the remote ID button.
Blue and steady—System ID is active via the local ID button.
•
Green—No hard drives have a fault.
•
Amber—At least one hard drive has failed.
•
•
Green—The system is not in fault.
•
Amber and steady—The system is in moderate fault.
•
Amber and blinking—The system is in severe fault.
•
Off—All fan modules are operating properly.
Amber—At least one fan module has a moderate fault.
•
Amber, blinking—At least one fan module has a severe fault.
•
Off—The server is in standby power mode or no power is present.
•
Green—The server is in main power mode.
•
Chapter 3
2
ID button
4
System health LED
6
Power status LED
8
Reset button
Maintaining the Server
OL-22326-01