Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch VBN-5085
Summary of Contents for Bosch VBN-5085
- Page 1 DINION 5000 AN VBN-5085 Installation Manual...
-
Page 3: Table Of Contents
Lens mounting Back focus adjustment Mounting the camera Configuration Menus 5.1.1 Top level menus 5.1.2 Menu navigation Pre-defined modes Day/Night switching Camera control communication (Bilinx) Main menu structure 5.5.1 Mode submenu Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... - Page 4 Camera ID submenu 5.6.8 Privacy masking submenu 5.6.9 Flip submenu 5.6.10 Defaults submenu Troubleshooting Resolving problems Customer service Maintenance Repairs 7.1.1 Transfer and disposal Technical Data Specifications 8.1.1 Dimensions 8.1.2 Accessories AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 5: Safety
Safety (power) ground is indicated by the symbol The system ground is only used to comply with safety standards or installation practices in certain countries. Bosch does not recommend connecting system ground to safety ground unless it is explicitly required. However, if the system ground and... -
Page 6: Important Safety Instructions
10. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment. -
Page 7: Important Notices
DINION 5000 AN Safety | en Important notices Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. -
Page 8: Fcc Information
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 9: Ul Certification
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT. Bosch notice More information For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 10: Introduction
Bilinx (bi-directional coaxial communication) – Wide operating temperature range – Lens wizard – Six pre-programmed operation modes – Dynamic noise reduction – Multiple language on-screen display – Built-in test pattern generator AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 11: Installation
Installation should only be performed by qualified service personnel in accordance with the National Electrical Code NEC800 (CEC Section 60) or applicable local codes. CAUTION! The camera module is a sensitive device and must be handled carefully. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 12: Connection And Mounting
Connecting System ground to Safety ground may result in ground loops that can disrupt the CCTV system. – Tighten the screws and reconnect the 3-pole connector to the camera. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 13: High Voltage Cameras
4.1.2 High voltage cameras Figure 4.2 High voltage power connection Connect the power cable of a high voltage camera to a 230 VAC power supply outlet. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 14: Video Connections
The camera has a BNC connector to connect the video coax cable with a male BNC connector. A UTP adapter (VDA-455UTP) is available as an optional accessory to allow a UTP video cable to be connected to the BNC connector. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 15: Alarm And Relay Connector
22 kOhm pull-up to +3.3 V. – Alarm in: configurable as active low or active high. – Max. 42 V allowed between camera ground and each of the relay pins. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 16: Lens Mounting
If a short circuit is detected on the lens connector, the on- screen display (OSD) failure message LENS SHORT CIRCUIT is shown. The lens circuit is automatically disabled to avoid internal damage. Remove the lens connector and check the pin connections. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 17: Back Focus Adjustment
Press and hold the center key for more than 1 second until the Install menu appears. Select Len Wizard and move cursor to the Set Back Focus Now item. Turn the back focus adjustment as required. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... - Page 18 DINION 5000 AN Lock the back focus locking button. Press and hold the center key for more than 1 second until all the menus disappear. Close the side door panel. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 19: Mounting The Camera
Figure 4.7 Mounting a camera CAUTION! Do not point the camera/lens into direct sunlight as this may damage the sensors. Note: A wide range of accessories is available for indoor and outdoor mounting. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 20: Configuration
The camera also has an Install menu in which the installation settings can be set. To access the Install menu, press the menu/select button (center) for longer than 2 seconds. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 21: Menu Navigation
To close all menus at once hold down the menu/select key until the menu display disappears or continually select the Exit item. Some menus automatically close after about two minutes; other menus have to be closed manually. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 22: Pre-Defined Modes
Enhancements are set to reduce picture noise. Useful for conditional refresh DVR and IP storage systems because reducing noise reduces the amount of storage required. Vibrant This mode has enhanced contrast, sharpness and saturation. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 23: Day/Night Switching
Bilinx communications can only be disabled using the buttons on the camera. Disabled camera buttons When the Bilinx communications link is active, the buttons on the camera are disabled. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 24: Main Menu Structure
Copy active Available Copies current mode settings to the mode mode mode number selected. numbers Mode Submenu Restores camera to the factory default Defaults settings. EXIT Returns to main menu. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 25: Exposure Submenu
Fixed shutter 1/120 (NTSC), scene is high enough. 1/250, In Fixed mode, selects shutter 1/500, speed. 1/1000, 1/2000, 1/4000, 1/10K, 1/100K Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... - Page 26 When active, some noise or spots may appear in the picture. This is normal camera behavior. It may also cause motion blur on moving objects. EXIT Returns to main menu. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 27: Day/Night Submenu
Motion - the camera avoids motion blur as long as the light level permits (it switches to monochrome earlier than it would with Color priority). Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... - Page 28 (mono) is switched Off in monochrome mode. On - the color burst remains active even in monochrome mode (required by some DVRs and IP encoders). EXIT Returns to main menu. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 29: Enhance / Dynamic Engine Submenu
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more detail. Extra sharpness can enhance the details of license plates, facial features and the edges of certain surfaces. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... - Page 30 Use in ANPR/LPR applications to reduce headlight glare. (Test on-site to ensure that it does benefit the application and is not distracting for operators of the security system.) EXIT Returns to main menu. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 31: Color Submenu
Blue gain. Saturation -15 to +5 Adjusts the color saturation. -15 gives a monochrome image; 0 gives the default saturation; +15 gives the most saturation. EXIT Returns to main menu. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 32: Vmd Submenu
Up, Down, Left, Right arrow keys. Pressing the Select key moves the flashing cursor to the opposite corner, which can now be moved. Pressing Select again freezes the area and exits the area menu. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 33: Image Adjustment Submenu
5.5.7 Image Adjustment submenu Item Selection Description Digital Zoom x1, x2, x4, x8, Select the zoom factor Off, On Select On to stabilize the image. EXIT Returns to main menu. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 34: Install Menu Structure
Select to access ID submenu Privacy Submenu Sets up a masking area masking Flip Submenu Selects flip submenu Default ALL Submenu Returns all settings for all modes to factory defaults AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 35: Language Submenu
Auto - the aperture of the lens is adjusted automatically. DC-iris speed 0,1,2…255 Adjusts the convergence speed of DC- iris. DC-iris The convergence speed is calibration automatically determined using the built-in calibration mechanism. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... - Page 36 Unlock the back focus locking button. Adjust the lens to the maximum lens opening. Turn the back focus adjustment as required. Lock the back focus locking button. Adjust lens opening to suit scene. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 37: Synchronization Submenu
Vertical phase 0, 1, … 359 Adjusts the vertical phase offset (when in LINE LOCK mode and a valid power supply frequency is detected). EXIT Returns to Install menu. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 38: Alarm I/O Submenu
Filter toggle: - output relay closes just before the IR filter starts moving and opens when video level has stabilized (2 to 3 seconds) EXIT Returns to Install menu. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 39: Connections Submenu
Select On to overlay the camera ID on the video test signal. Test pattern Color bars, Select the desired test pattern to help Raster, installation and fault-finding. Impulse, Cross Impulse, Crosshatch EXIT Returns to Install menu. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 40: Camera Id Submenu
Mode ID pos. Off, Top left, Camera mode is displayed on the Top right, screen in the selected position. Bottom left, Bottom right EXIT Returns to Install menu. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 41: Privacy Masking Submenu
Pressing Select again freezes the area and exits the area menu. 5.6.9 Flip submenu Item Selection Description Flip Selects the flip mode. horizontal Vertical Both EXIT Returns to Install menu. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 42: Defaults Submenu
Restores all settings of the six modes to their default (factory) values. Select YES then press the Menu/Select button to restore all values. When completed the message RESTORED! is shown. AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 43: Troubleshooting
When using DC power connections. ensure that polarity is correct. No connection The unit's configuration. Check all configuration established, no parameters. image transmission. Faulty installation. Check all cables, plugs, contacts and connections. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 44: Customer Service
DINION 5000 AN Customer service If you cannot resolve a fault, please contact your supplier or system integrator, or contact Bosch Security Systems Customer Service directly. The Installer should write down all information regarding the unit so that it can be referenced for warranty or repair. The... -
Page 45: Maintenance
Defective or superfluous devices and parts should be disposed of professionally or taken to your local collection point for hazardous materials. Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03... -
Page 46: Technical Data
Dynamic Noise 3D-NR, 2D-NR Reduction Sharpness Sharpness enhancement level selectable White Balance ATW indoor, ATW outdoor, ATW hold and manual Contrast Low, Medium, High Enhancement Lens type Manual or DC iris AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... - Page 47 600 g (1.32 lb) without lens (230 VAC) Tripod mount Bottom (isolated) and top 1/4" 20 UNC Operating -20 °C to +55 °C (-4 °F to +131 °F) temperature Controls OSD with softkey operation Bosch Security Systems Installation Manual AM18-Q0644 | v1.0 | 2013.03...
-
Page 48: Dimensions
| Technical Data DINION 5000 AN 8.1.1 Dimensions (4.646) (3.346) (1.339) 1/4"-20 UNC DINION 1/4"-20 UNC (1.889) (4.843) (2.638) mm (in) Figure 8.1 Dimensions AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 49: Accessories
Outdoor environmental housings – Lenses (varifocal, fixed and motorized zoom) – Bilinx communication interface box and software Contact a Bosch representative in your area for the latest available accessories or visit our website at www.boschsecurity.com Bosch Security Systems Installation Manual... - Page 50 | Technical Data DINION 5000 AN AM18-Q0644 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
- Page 52 Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2013...