Bosch DINION 5000 AN Quick Manual

Video | DINION AN 5000
DINION AN 5000
www.boschsecurity.com
The DINION 5000 family combines high resolution with
high dynamic range in a true day/night analog camera.
The high performance 960H 1/3-inch CCD sensor with
a resolution of 720TVL, the high dynamic range engine,
and the advanced image processing technology
combine together to provide a detailed image with
outstanding accuracy in color reproduction even under
harsh lighting conditions. True day/night performance
ensures the highest image quality possible at any time,
day or night. The camera is easy to install and offers
the best solution for demanding scene conditions.
System overview
The camera is supplied ready to operate – simply
attach the separately available lens, connect video and
then power. Six distinct pre-programmed operational
modes are stored in the camera. Recall the mode that
suits your application for optimized performance. The
lens wizard ensures accurate back-focusing for
perfectly sharp pictures at all times. For especially
challenging situations where fine tuning or special
settings are required, the camera parameters can be
individually set using the control buttons on the side
of the camera and an Onscreen Display (OSD).
960H
Ultra high resolution 960H sensor
u
High Dynamic Range to see bright and dark details
u
simultaneously
Detail enhancement
u
Bilinx communication for remote set-up and control
u
Easy to install
u
Functions
Detail in extreme lighting
In harsh lighting, the difference between the brightest
and the darkest parts of a scene can be extreme. To
produce a clear picture in these conditions, the CCD
sensor in the camera generates two images; one long
exposure to resolve details in the scene's darkest
areas, and one short exposure to resolve details in the
scene's brightest areas. The advanced image
processing technology in the camera combines these
dual shutter images, mixing pixels from each exposure
to produce the most detailed image possible. The
superior wide dynamic range for all lighting conditions
reveals details previously unseen.
Day/Night mode
The day/night mode provides enhanced night viewing
by increasing the IR sensitivity. The IR filter can switch
from color to monochrome automatically by either
sensing the illumination level or via the alarm input.
The filter can be switched manually via the alarm
input, through the camera menu or via the Bilinx
coaxial control interface. An internal through-the-lens
IR detector enhances the monochrome mode stability,
as it prevents reverting to the color mode when IR
illumination is dominant. IR contrast is also measured
and used to handle reflected IR light in outdoor
scenes.