Advertisement
Built-in units
RAD4A1 Drain Kit
Internal/External Drain Kit
Drain kit for use on "J" series wall cases. For more positive control of
condensate water, the RAD4A1 drain kit routes condensate to the
exterior or to the interior of the building through the wall case. Suitable
provision (field applied) should be made to connect the drain tube to a
drain system in the building. Drain tube assembly is 1/2" O.D. copper.
Note: The RAG14E exterior grille is NOT compatible with the RAD4A1
EXTERNAL drain tube. Use of this grille would require the use of the
INTERNAL TUBE configuration to drain the unit.
RAK65A1 Window Installation Kit for "J" Series
Built-in Units
Adapts built-in wall case for window installation. (This kit is included in
"J" series units designed for window installation.) Window opening
width—26-7/8" to 40". Window opening height—16-3/8" minimum.
RAB46 Standard Wall Case for "J" Chassis
Built-in Unit
Solid-sided wall case fabricated of galvanized steel with baked-enamel
(beige) finish. Welded areas are coated with a sealing compound to
help resist rust and corrosion. Polymer gasket surrounds opening to
assure tight weather seal. Aluminum grille (RAG13) is included. Panels
on interior and between case and grille provide weather protection
prior to installation of chassis.
RAB47A/48A Tenant Option Wall Cases for "J" Chassis
When the air conditioner is offered as a tenant option, these wall cases
provide protection against outside elements.
RAB47A—includes wall case, exterior grille, weather panel and steel
closure panel.
RAB48A—includes wall case, exterior grille, insulated steel indoor
closure panel and insulated outdoor panel.
16
Advertisement
