Tascam DP-24 Notice

Notice
Always use the most recent firmware for this device.
Please visit the TASCAM web site (http://tascam.com) to
check for the latest firmware.

Maintenance items

V1.02 changes
•
Some WAV format files were not recognized. This has
been fixed.
•
When MMC mode was set to
commands were not always received. This has been
fixed.
•
When the MIDI GENERATOR was set to
synchronization was sometimes lost. The stability of
MTC GENERATOR output has been improved.
•
Playback could become unstable after recording a 24-
bit, 44.1kHz song using punch-in and punch-out. This
has been fixed.
•
When using CD Writer to change song order,
sometimes canceling a change would not be reflected
correctly in the track order. This has been fixed.
•
The REMAIN indicator shown in
modes is now calculated for recording
Mastering
stereo WAV Files.
•
Waveforms were not always displayed correctly when
zoomed in or out. This has been fixed.
•
Values shown in the EQ pop-up were sometimes
incorrect. This has been fixed.
•
On the screen, more effects could be added
MIXER
then are supported by the unit. This has been fixed.
•
In addition, other improvements to operation stability
have been made.
D01174200B
DP-24
, MMC REC
SLAVE
,
MTC
and
Mixdown
Release Notes
Checking the firmware version
Check the firmware version of your DP-24 before
conducting a firmware update.
1. Turn the unit's power ON.
2. Press the MENU button to open the
3. Use the JOG/DATA dial or CURSOR (5/b/g/
t) buttons to select the
(selected item appears green), and press the F4 (t)
button to open the
INFORMATION
You do not need to update the unit's firmware if the
SYSTEM VERSION
newer than the version that you intend to use for the
update.
screen.
MENU
menu
INFORMATION
screen.
shown here is the same as or
TASCAM DP-24
1