1 – Introduction and installation The TASCAM Mixer Companion (or “TMCompanion”) is software for Microsoft Windows XP or Apple Com- puter’s Mac OS X, allowing the following operations to be carried out on the TASCAM DM-4800 and DM- 3200 digital mixing consoles (referred to in this manual as “TASCAM DM”) from the host computer, using a USB connection for 2-way operation: •...
1 – Introduction and installation : Installation (Mac OS X) Repairing and uninstalling TMCompanion To uninstall the software, run the program Alternatively, the ’s SETUP.EXE Control Panel Add/Remove Programs from the CD-ROM: item can be used to remove the TMCompanion soft- ware in the usual way: Figure 3: Uninstalling the software Figure 4: Using the Control Panel to remove the...
2 – Using TMCompanion Make sure the TASCAM DM is connected to the The application will also automatically quit, display- computer and turned on. Double-click the application ing a warning message panel if the connection to the to start it. TASCAM DM is broken while the software is run- ning.
Owner’s Manual if you are unsure of where these belong. For channels 49 through 64 (DM-4800) or 33 Figure 7: Meter Bridge window through 49 (DM-3200), thse choices are restricted to Input Post Fader Note that this window comes in three “fold-out” sec-...
2 – Using TMCompanion : Firmware update Firmware update From time to time, TASCAM will make updates The version of the mixer firmware and the version of available from the Web site or through your the new firmware are shown in the Mixer Status File TASCAM distributor.
The mixer’s internal clock and calendar may be set from the host computer’s internal clock using the button. Mixer Clock TEAC CORPORATION Phone: +81-422-52-5082 www.tascam.com 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 www.tascam.com 7733 Telegraph Road, Montebello, California 90640 Printed in China...