Quick Test Mode; Maytag Services - Maytag MGR6775ADB Service Manual

Testing Procedures
To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing,
unless testing requires power and/or gas.
"Quick Test" Mode for Electronic Range Control
Follow the procedure below to perform the Electronic Range Control (ERC) quick test. Instructions must be entered
within 32 seconds of each other (via the touch pad) or the ERC will exit the quick test.
1. Press and hold the UPPER CANCEL and BROIL pads for 3 seconds.
2. Once the control has entered the "Quick Test" mode, release both pads.
3. Press each of the following pads indicated in the table below.
NOTE: Press the applicable pad once to activate the associated response.
Press the applicable pad a second time to deactivate the associated response.
Display will indicate the following:
Pad
BAKE ................................... Bake DLB and Bake relay activated
BROIL.................................. Broil DLB and Broil relay activated
KEEP WARM ...................... Bake DLB and Broil DLB activated
CONVECT BAKE ................ Convection Fan on low speed
CONVECT ROAST ............. Convection Fan on high speed
CLEAN................................. MDL relay activated
COOK & HOLD.................... Displays last diagnostic code
FAVORITE........................... Displays EEPROM version number
TIMER ................................. Displays main code version number
CLOCK ................................ All display segments illuminated
OVEN LIGHT....................... Oven light activated
CANCEL .............................. Exit Quick Test mode
1........................................... Even segments on
2........................................... Odd segments on
3........................................... Convection Ring activated; Convection Ring DLB activated
4........................................... N/A
5........................................... N/A
6........................................... N/A
7........................................... N/A
8........................................... N/A
9........................................... N/A
AUTOSET............................ Steps through last 5 diagnostic codes
Setup Options (0) pad is pressed "Press Desired Pad for Selection" will scroll in the display. When a feature is
displayed the AUTO SET pad is used to toggle the options. Use the chart below to identify the available options.
Control
Function Selection
12 hour shut-off
Timer beeps
Cook time beeps
Control lock
Scroll speed
Volume level
Temp C/F
Language
Default
Display On/Off
22
!
Response
Pad Default Option
1 12 HR Energy Saver ON
2 Timer Reminder Beeps for 5 Min.
3 Cook Time Reminder Beeps for 30 Min.
4 Control Unlocked
5 Medium Speed
6 6 bars
7 Degrees F
8 English
9 Press AUTO SET for Factory Settings
Clock Clock Display is ON
WARNING
16023415
Additional Options
12 HR Energy Saver OFF
Timer Reminder Beeps for 30 Min.
No Timer Reminder Beeps
Cook Time Reminder Beeps for 5 Min.
No Cook Time Reminder Beeps
Control Locked
Fast Speed Slow Speed
1 to 8 bars
Degrees C
French, Spanish
N/A
Clock Display is OFF
©2004 Maytag Services