Panasonic KX-TDA15 Pt Programming Manual page 14

1.1 Introduction
[Example of Entering Characters]
To enter "Ann":
Notes
• To erase the character on the cursor, press CLEAR.
• To move the cursor to the left, press
• To move the cursor to the right, press
the same button consecutively (e.g. "G" and "I"), you must press this button or the FWD/DND
button after entering the first character.
• If SELECT is pressed, the characters for each button will be displayed in reverse order.
• To toggle between Table 1 and Table 2 when using the KX-T7600 series or an IP-PT, press
the leftmost soft button.
14 PT Programming Manual
n
A
2 6 (5 times)
n
6
(5 times)
OR
FWD/DND
.
. When entering two or more characters that use