Tilt Support Lever For Power Trim And Tilt Or Hydro Tilt Model; Top Cowling Lock Lever (Pull Up Type); Flushing Device - Yamaha F150 Owner's Manual

1. Trim tab
2. Bolt
3. Cap
EMU26340
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up po-
sition, lock the tilt support lever to the clamp
bracket.
Basic components
1. Tilt support lever
EMU26382

Top cowling lock lever (pull up type)

To remove the engine top cowling, pull up the
lock lever(s) and lift off the cowling. When in-
stalling the cowling, check to be sure it fits
properly in the rubber seal. Then lock the
cowling by moving the lever(s) downward.
1. Top cowling lock lever(s)
EMU26460

Flushing device

This device is used to clean the cooling water
passages of the motor using a garden hose
and tap water.
NOTE:
For details on usage, see page 53.
19