Use the "
" (set) button to rotate the fuel flow
display in the following order:
Press the "
" (set) button once to display
G
the fuel flow of the starboard engine. An " "
(for starboard) will also be displayed.
Press the "
" (set) button a second time to
G
display the fuel flow of the port engine. A " "
(for port) will also be displayed.
Press the "
" (set) button a third time to
G
return the display to the total fuel flow of
both engines. "
will also be displayed to indicate both the
port and starboard engines.
NOTE:
The fuel flow meter displays gallons/hour or
G
liters/hour according to operator prefer-
ence. Select the desired unit of measure-
ment by setting the selector switch on the
back of the gauge during installation.
1. Selector switch
ZMU01749
" (for port and starboard)
Basic components
The fuel consumption meter and fuel econ-
G
omy meter will indicate the same unit of
measurement.
EMU26760
Fuel consumption meter
This gauge displays the total amount of fuel
consumed since the gauge was last reset.
Press the "
" (mode) button repeatedly
until the indicator on the face of the gauge
points to total "
" (total). To reset the total
fuel consumption to zero, press the "
and "
" (mode) buttons at the same time.
EMU26770
Fuel economy
This gauge displays the distance per liter or
gallon when cruising, and is only for reference
use by the operator.
Press the "
" (mode) button repeatedly
until the indicator on the face of the gauge
points to "
" (economy).
" (set)
ZMU01751
ZMU01752
25