Sony BVME170A Operation Manual page 34

To compensate for this difference, the D93, D65, D61, D55
and User1 to User5 settings (except D-Cine) of the monitor
are adjusted by an offset*.
* The offset value applied (x-0.006, y-0.011) is based on the Judd's function
to the CIE 1931 (x, y) value.
ENTER button
UP/DOWN buttons
1
Turn on the monitor with the MAIN POWER switch.
The Select Area screen appears.
Select Area
North America
Latin America
Africa
Australasia
Europe
Middle-East
Asia Except Japan
Japan
2
Press the UP or DOWN button of the controller to
select the area where you intend to use the monitor and
press the ENTER (Ent) button.
If you select either Latin America or Asia Except
Japan, one of the following screens appears.
34
Settings
Ent button
1 North America
2 Latin America
3 Africa
B
B
B
B Australia/New Zealand
B
B
B
B
Europe/Russia
Middle East
4 Asia Except Japan
5 Japan
If 2 Latin America is selected:
Select Area
Latin America
PAL & PAL-N Area B
NTSC & PAL-M Area B
Select PAL & PAL-N or NTSC & PAL-M and press
the ENTER (Ent) button.
If 4 Asia Except Japan is selected:
Select Area
Asia Except Japan
NTSC Area B
PAL Area B
Customers who will use this monitor in the shaded
areas shown in the map below should select NTSC
Area.
Other customers should select PAL Area.
Then press the ENTER (Ent) button.
PAL&PAL-N area
NTSC&PAL-M area
NTSC area
PAL area