Hitachi HUS157336EL3600 Oem Manual page 45

12.2.6 SCSI bus Terminator Power
WIDE LVD
No. Option Jumper Connector (C3)
1 Remove the Jumper Socket
for C3-23,24 (Default)
1
2
Install the Jumper Socket
2
for C3-23,24
1
2
Note 1. In the case that terminator power is supplied to SCSI cable (TERMPWR),
precautions must be taken to prevent coupling of the SCSI bus signal.
12.2.7 Write Protect
WIDE LVD, SCA-2 LVD
No. Option Jumper Connector (C3)
1 Remove the Jumper Socket
for C3-15,16 (Default)
1
2
Install the Jumper Socket
2
for C3-15,16
1
2
Note. If the Write Protect setting is done via Auxiliary Connector (C4) in the case of
WIDE LVD drive, jumper in C3-15,16 must be removed.
23
24
23
24
15 23
16 24
15 23
16 24
Drawing No. Sheet No. Revision 5
Meaning
Terminator power not supplied
to SCSI TERMPWR line
Terminator power supplied
to SCSI TERMPWR line
(To SCSI bus cable)
Meaning
Write enabled
Write protected
K6602906 45/46 2003/6/12