To Use This Product Safely - Hitachi HUS157336EL3600 Oem Manual

Scsi hard disk drive
Hide thumbs Also See for HUS157336EL3600:
Table of Contents

Advertisement

Read and follow all instructions and cautions described in this chapter before using the
drive. It is recommended that this manual is kept at a proper location for quick reference.
The description related to safety in this chapter may be changed without notice.
Influence for environment
Although this product emits electro-magnetic field, it will be found to be in compliance with
the EMI regulations such as VCCI class B, FCC Part 15 class B. However, anything other
than this product, such as an interface cable, is excluded. Therefore, the following cases
require a system side improvement.
(1) Disturbance of operations of other products or equipment
(2) Disturbance caused by other product, such as cabling, to operations of other products
or equipment.
Do not change the condition of the drive, excluding the change admitted by Hitachi.
Violating above-mentioned precautions will void any warranties of the HDD.
Please read and understand the following explanation for safety.
General cautions for safety
0.1.1
When handling the drive, follow all instructions and cautions described in this
manual and the packing specification manual.
0.1.2
The safety instructions in this manual are thoroughly considered, but unexpected
situations can occur. Not only follow the instructions in this manual, but also be
careful for the safety by yourself.
0.1.3
Do not convert or change the drive. Convert or change of the drive will void any
warranties.
0.1.4
It is customer's responsibility to assure the actual system in which the drive is
installed meets the appropriate safety regulation. However the drive itself is found
to be compliance with the following standards:
Headline of safety caution
Safety instructions and cautions are indicated as the following head line which means as
follows.
Caution
Caution

To use this product safely

UL 1950 3rd Edition
CAN/CSA C22.2-M95
IEC60950: 1991
EN60950: 1992
FCC Part15 Class B, VCCI Class B
EN55022: 1998, Class B (CE Mark)
AS/NZS 3548: 1995, Class B (C-tick)
CNS13438/C6357, Class B (BSMI)
RRL mark for Korean EMC
This symbol indicates that potential danger may exist which may
cause slight or medium grade bodily injury if safety instructions are not
followed.
This symbol indicates that potential danger may exist which may
cause damage to the product or to the neighboring property if safety
instructions are not followed.
Drawing No. Sheet No. Revision 5
K6602906
3/46
2003/6/12

Advertisement

Table of Contents
loading

Table of Contents