Hitachi HUS157336EL3600 Oem Manual page 4

Followings are the cautions and contents described in this manual.
Items of indicating
- Safety cautions for this product
Items of indicating
- Safety cautions for this product
- Spindle Start and Stop
- Mounting of the drive
- Reliability temperature
- Precautions for handling
Safety cautions for this product
Caution
0.2.1 This product is not authorized for use in life support devices or other applications
which pose a significant risk of personal injury.
0.2.2 Handle the drive with care not to suffer bodily injury caused by hitting the edge of
the frame or accidental dropping of the drive.
0.2.3 Since the drive uses glass media for the disk platter, opening of HDA may cause
bodily injury. Warranty void in case of opened HDA or any broken HDA seals. Do
not open the HDA or break any HDA seals.
0.2.4 Temperature of the drive may become more than 50°C. Handle the drive carefully
not to get burned.
Caution
0.2.5 To prevent data from being lost due to an unexpected fatal error, data back up is
required.
0.2.6 If a foreign conductive substance (metallic powder, fluid, etc.) adheres to active
metal of the drive (Print pattern, component lead, etc. on Printed Circuit Board
(PCB)), it may cause catastrophic failures. Customer should protect the drive from
the above condition.
0.2.7 Improper insertion of connector or wrong jumper setting may cause catastrophic
failures. Referring to this manual prior to the connector insertion or jumper setting
can help insure correct insertion.
0.2.8 Follow the environmental conditions and power requirement described in this
manual. If violating these specifications, the drive failure may occur.
0.2.9 Protect the drive against Electro Static Discharge (ESD) during handling.
0.2.10 If storage period becomes long after unpacking, supply power to the drive and
rotate the disks 8 minutes or more. This operation shall be executed every 3
months.
To use this product safely (Continued)
Caution
:
Caution
:
Page 4
Page 4-5
Page 16
Page 24
Page 26
Page 27
Drawing No. Sheet No. Revision 5
K6602906 4/46 2003/6/12