Required Tools And Equipment; Site Log - Cisco 4000 Preparing To Install

Site Log

Site Log
The Site Log provides a historical record of all actions relevant to the router. Keep it in an
accessible place near the chassis where anyone who performs tasks has access to it. Use the
Installation Checklist to verify steps in the installation and maintenance of your router. Site
Log entries might include the following:
•
Installation progress—Make a copy of the Installation Checklist and insert it into the
Site Log. Make entries as each procedure is completed.
•
Upgrades and removal or replacement procedures—Use the Site Log as a record of
ongoing router maintenance and expansion history. Each time a procedure is performed
on the router, update the Site Log to reflect the following:
— Additional network processor modules installed
— Removal or replacement of network processor modules
— Configuration changes
— Maintenance schedules and requirements
— Maintenance procedures performed
— Intermittent problems
— Related comments
Warning
laws and regulations. (To see translated versions of this warning, refer to the appendix
"Translated Safety Warnings.")

Required Tools and Equipment

You need the following tools and equipment to install the router:
•
ESD cord and wrist strap
•
Screwdrivers, Number 1 and Number 2 Phillips
•
One serial port adapter cable for each serial port to connect the port with the remote
device or network
2-8 Cisco 4000 Series Installation Guide
Ultimate disposal of this product should be handled according to all national