NEC Express5800/320Ma Planning Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Server
  5. Express5800/320Ma
  6. Planning manual
NEC Express5800/320Ma Planning Manual

NEC Express5800/320Ma Planning Manual

Hide thumbs Also See for Express5800/320Ma:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Administrator's Manual, User Manual
Express5800/320Ma:

Site Planning Guide

NEC Solutions (America), Inc.
NR573

Advertisement

Table of Contents
loading

Related Manuals for NEC Express5800/320Ma

Summary of Contents for NEC Express5800/320Ma

  • Page 1: Site Planning Guide

    Express5800/320Ma: Site Planning Guide NEC Solutions (America), Inc. NR573...
  • Page 2 Software described in NEC (a) is the property of NEC and/or its licensees, (b) is furnished only under license, and (c) may be copied or used only as expressly permitted under the terms of the license.

  • Page 3: Table Of Contents

    Contents Preface 1. Welcome to Site Planning for Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core systems Site Planning Overview Site Planning for Fault-Tolerant Systems Site Planning Checklist System Documentation 2. Cabinet and Monitor Requirements Cabinet Requirements Monitor Requirements 3. Space Planning...
  • Page 4 Sample PDU Usage Calculation Appendix A. System Specifications System Specifications Rack-Mountable System Specifications Appendix B. Electrical Circuit and Wiring Information Fault Protection Requirements Grounding Considerations Circuit Wiring Diagrams Electrical Power Connectors Appendix C. Standards Compliance Index Index-1 Express5800/320Ma: Site Planning Guide...
  • Page 5 Figure 5-3. Pedestal Systems: A-Side Power Connected Directly to a UPS Figure A-1. Pedestal System - Front View Figure A-2. Pedestal Express5800/320Ma 3.2 GHz systems - Rear View Figure A-3. Pedestal Express5800/320Ma 3.6 GHz systems- Rear View Figure A-4. Rack-Mountable System - Front View Figure A-5.
  • Page 6 Pedestal System Specifications Table A-2. Cabinet Dimensions A-10 Table A-3. Rack-Mountable System Specifications A-11 Table B-1. Connectors for AC Power Outlets B-10 Table C-1. EMI Standards Table C-2. Immunity Standards Table C-3. Safety Standards Table C-4. Noise Standards Express5800/320Ma: Site Planning Guide...

  • Page 7: Preface

    Preface Purpose of This Manual The Express5800/320Ma: Site Planning Guide documents the site requirements and customer responsibilities related to preparing a site for the installation of Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core systems. Audience This manual is intended for those responsible for preparing a site for the installation of an Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system.

  • Page 8: Getting Help

    The monospace font indicates message text. For example: The operation completed successfully. Getting Help If you have a technical question about Express5800/320Ma hardware or software, try these online resources first: • Online support from NEC Technical Support. You can find the latest technical...
  • Page 9 Preface Notices • All regulatory notices are provided in Appendix C, “Standards Compliance” of this site planning guide. • Although this guide documents modem functionality, modems are not available for all systems. Ask your sales representative about modem availability. • ActiveService Network (ASN) is not currently available, but may be ordered in the future.
  • Page 10 Preface Express5800/320Ma: Site Planning Guide...

  • Page 11: Welcome To Site Planning For Express5800/320Ma 3.2 Ghz, 3.6 Ghz, And Dual-Core Systems

    Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core systems For an overview of the information you need to know and of the tasks you need to perform to prepare a site for an Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system, see: •...

  • Page 12: Site Planning For Fault-Tolerant Systems

    If your system is covered by a service agreement and you need help with site planning, contact the NEC Technical Support. If you have a contract with the NEC Technical Support to install the system, contact them after you have prepared the installation site and moved the system to the site.

  • Page 13: Site Planning Checklist

    Will your system additionally include any of the following PCI adapters for network communications? If so, indicate how many of each and plan network connections for all Ethernet ports you will use. Welcome to Site Planning for Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core systems...

  • Page 14: Table 1-1. Ethernet Pci Adapters

    Directly attached U526 Optical Fibre Channel PCI Adapter, two of which are provided in the AK419 Attachment Kit Will you supply your own monitor or will NEC Solutions (America), Inc. supply the monitor? N O T E Use the USB keyboard and mouse supplied by NEC Solutions (America), Inc..

  • Page 15: System Documentation

    Express5800/320Ma account executive or distributor. System Documentation When you receive your system, you receive a printed copy of the Express5800/320Ma: Installation Guide. The software installation program lets you install an online copy of Welcome to Site Planning for Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core systems...

  • Page 16: Table 1-3. Express5800/320Ma Documentation

    NEC Technical Support Web site: http://support.necsam.com/servers/ Express5800/320Ma Express5800/320MaExpress5800/320MaTable 1-3 lists Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system documents and the tasks described in each document. Table 1-3. Express5800/320Ma Documentation Document Task Express5800/320Ma: Site Planning Prepare a site for installation of your Guide Express5800/320Ma 3.2 GHz, 3.6 GHz, or...
  • Page 17 Consult technical reference information for Reference Guide Express5800/320Ma systems Change BIOS settings † ActiveService Network (ASN) is not currently available, but may be ordered in the future. Welcome to Site Planning for Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core systems...
  • Page 18 System Documentation Express5800/320Ma: Site Planning Guide...

  • Page 19: Cabinet And Monitor Requirements

    “Monitor Requirements” on page 2-4 Cabinet Requirements If you are providing your own cabinet for an Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core systems, make sure the cabinet contains a rack that is 19-in. wide and that meets the Electronic Industries Association (EIA) 310-D standard.
  • Page 20 To prevent stray voltages, all components are grounded together through the vertical mounting rails to the cabinet frame, and then to local building ground. To ensure signal quality, use a grounding cable provided by NEC Solutions (America), Inc. for local building ground.

  • Page 21: Figure 2-1. Rail Clearance

    Cabinet Requirements Figure 2-1. Rail Clearance 0.5-inch (1.27-cm) 0.5-inch minimum minimum msys182 Front vertical EIA rail Accessory leg Front of cabinet Cabinet and Monitor Requirements...

  • Page 22: Monitor Requirements

    Monitor Requirements Monitor Requirements If you are using a monitor that is not supplied by NEC Solutions (America), Inc., make sure that: • The monitor accepts universal 100–240 VAC, 50/60 Hz power. • The VGA cable has a 15-pin D-sub connector.

  • Page 23: Space Planning

    Chapter 3 Space Planning For information about planning sufficient space for your Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system, see: • “Room Requirements” on page 3-1 • “Planning for Cables” on page 3-2 Room Requirements To ensure that the installation site provides a properly equipped, cooled, and sized environment, make sure that the site: •...

  • Page 24: Planning For Cables

    Planning for Cables Planning for Cables To accommodate cables from your Express5800/320Ma 3.2 GHz or 3.6 GHz system, make sure to provide: • Two telephone lines: – One telephone line for use when calling for service – One telephone line for the ASN modem •...

  • Page 25: Electrical (Ac) Power Planning

    Chapter 7, “Rack Configuration Planning” Redundant Power Sources Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core systems require at least two separate and independent AC power sources–an A-side power source and a B-side power source–that provide power to the system’s power receptacles, labeled, respectively, A and B.

  • Page 26: Ac Power Service Requirements

    Table 4-1. AC Power Service Requirements Nominal Input Voltage; Component Nominal Frequency Range Receptacle Express5800/320Ma 3.2 GHz, 3.6 100–240V; 50/60 Hz Table 4-9. GHz, or Dual-Core system 200–240V; 50/60 Hz Table 4-11.

  • Page 27: Table 4-2. Worksheet For Determining A-Side Power Requirements

    Table 4-2. Worksheet for Determining A-Side Power Requirements @ Power AC Power System Component Quantity (Watts) (Extended) Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system KVM switch TOTAL A-SIDE POWER REQUIREMENTS Table 4-3. Worksheet for Determining B-Side Power Requirements @ Power AC Power...

  • Page 28: Power Outlet Requirements

    2. Multiply the value in the Quantity column by the value in the Outlets column, and enter the total in the Subtotal column. 3. Add the values in the Subtotal column and enter the sum next to TOTAL NUMBER OF A-SIDE POWER OUTLETS and TOTAL NUMBER OF B-SIDE POWER OUTLETS. Express5800/320Ma: Site Planning Guide...

  • Page 29: Connecting A System Directly To Two Separate Power Sources

    TOTAL NUMBER OF B-SIDE POWER OUTLETS Connecting a System Directly to Two Separate Power Sources If you do not connect your Express5800/320Ma 3.2 GHz or 3.6 GHz system or PDUs to a UPS, provide two AC power sources that are as electrically independent of each other as the installation site allows.

  • Page 30: Nec-Supplied Power Cords

    Figure 4-2. Pedestal System Connected Directly to AC Power asys002 A-side system power cord B-side system power cord AC power outlets Circuit breakers (maximum of 20A) NEC-Supplied Power Cords NEC Solutions (America), Inc. supplies power cords for: Express5800/320Ma: Site Planning Guide...

  • Page 31: System Power Cords

    North America. System Power Cords Table 4-9 lists the available power cords for Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core systems that connect directly to an AC power source (not to a PDU or to a UPS).

  • Page 32: Pdu Power Cords

    250V IEC 320 C14 to 3.5m B50301 IEC 60320 C13 PDU Power Cords The AA-P41104 PDU supplies power to Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core systems. Table 4-11 lists the available power cords to connect PDUs directly ® ®...

  • Page 33: Power Cords For Optional Components

    NEC-Supplied Power Cords Table 4-11. PDU Power Cords to AC Power Locale Plug Type Rating Length Marketing ID North America IEC 60320 (formerly 320) 20A/250V 15 ft B50155 † and Japan C19 to NEMA L6-20P 50–60 Hz (4.5m) North America...
  • Page 34 Table 4-13. Power Cords for Optional Components (Continued) Locale Rating Plug Type Length Marketing ID New Zealand 10A/250V AS/NZS 3112:1993 2.5m B501-21 South Africa 13A/250V SABS164-1:1992; 2.5m B501-49 ZA/3 Switzerland 10A/250V SEV 1011-S24507 2.5m B501-37 United Kingdom 13A/250V BS1363/A 2.5m B501-13 4-10 Express5800/320Ma: Site Planning Guide...

  • Page 35: Ups Planning

    “Connecting a System Directly to a UPS” on page 5-4 Qualified APC UPS Models NEC Solutions (America), Inc. has qualified certain UPS models from American Power Conversion Corporation (APC) for use with Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core systems. The qualified APC Symmetra and APC Smart-UPS models are listed in Tables 5-1, 5-2, and 5-3.

  • Page 36: Communicating With A Ups Over A Network

    160V to 286V 230V or 240V Communicating with a UPS over a Network Use the following additional tools to enable an Express5800/320Ma system and a UPS to communicate over the network: • APC Network Management Card EX (APC part number AP9617) An APC Network Management Card EX is a standard component of the Symmetra UPS, but you must purchase the network card for the APC Smart-UPS.

  • Page 37: Connecting Power To Systems, Pdus, And A Ups

    Connecting Power to Systems, PDUs, and a UPS Connecting Power to Systems, PDUs, and a UPS When you plan for PDUs, note the following: • Only the top PDU is connected to the UPS. • The bottom PDU is connected directly to an AC power main. •...

  • Page 38: Connecting A System Directly To A Ups

    You can connect the A-side power connectors of your system directly to a UPS, as shown in Figure 5-3. Figure 5-2. Rack-Mountable Systems: A-Side Power Connected Directly to a UPS asys004 B-side system power cord A-side system power cord UPS power cord AC power outlets Circuit breakers (maximum of 20A) Express5800/320Ma: Site Planning Guide...

  • Page 39: Figure 5-3. Pedestal Systems: A-Side Power Connected Directly To A Ups

    Connecting a System Directly to a UPS Figure 5-3 shows how to connect a UPS to pedestal Express5800/320Ma 3.2 GHz and 3.6 GHz systems. Figure 5-3. Pedestal Systems: A-Side Power Connected Directly to a UPS asys005 B-side system power cord...
  • Page 40 Connecting a System Directly to a UPS Express5800/320Ma: Site Planning Guide...

  • Page 41: Network And Telephone Line Planning

    Chapter 6 Network and Telephone Line Planning For information about planning network and telephone lines for your Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system, see: • “Network Cable Requirements” on page 6-1 • “Telephone Line Requirements” on page 6-2 •...

  • Page 42: Telephone Line Requirements

    Telephone Line Requirements Generally, two telephone lines are required to ensure technical support for your Express5800/320Ma 3.2 GHz or 3.6 GHz system: • One telephone line for use when calling for service •...

  • Page 43: Site Planning For Systems In An Ftgateway Group

    Must connect to the same subnetwork through system Ethernet ports, ports of Ethernet adapters, or VTMs. An ftGateway group that contains Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core systems can consist of one of the following: – Slave systems with no remote management adapter in a group with an ftGateway system that has VTMs –...
  • Page 44 Make sure that only layer 1 and layer 2 devices separate the gateway and slave systems. During a connection, the gateway system assigns the slave system a temporary IP address from an IP address range reserved by NEC Solutions (America), Inc. and uses that address for all traffic.

  • Page 45: Rack Configuration Planning

    Correspondingly, two power distribution units (PDUs) provide power to the receptacles. Use of PDUs is optional unless you have a support agreement with NEC Solutions (America), Inc. If you do have a support agreement with NEC Solutions (America), Inc., use pairs of PDUs to provide AC power to systems and components in a cabinet if six or more power cords would otherwise exit from the cabinet.

  • Page 46: Determining Pdu Requirements

    A-side PDU, complete the information in Tables and 7-2. This information will help you determine the current that the Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core systems and rack-mounted components will draw and whether you need a second pair of PDUs. To complete Table 7-1 1.

  • Page 47: Table 7-2. Calculating A-Side Pdu And Rack-Space Requirements

    Determining PDU Requirements To complete Table 7-2 1. In column 1, write the names of each system or component in the rack. If you have more than one system, use a row for each system. 2. In column 2, write the cumulative number of rack units (Us): Add the number of Us (see Table 7-1) for the component to the value in the space above and write the...

  • Page 48: Sample Pdu Usage Calculation

    2. Cumulative Number of 4. Cumulative 1. Component Space Used (U) A-Side Outlets Current (A) PDU pair 0.00 Express5800/320Ma 3.2 GHz, 3.6 3.91 GHz, or Dual-Core system KVM switch 4.15 Express5800/320Ma 3.2 GHz, 3.6 11.06 GHz, or Dual-Core system PDU pair Express5800/320Ma 3.2 GHz, 3.6...
  • Page 49 Sample PDU Usage Calculation In this example, two PDUs can provide enough current for the KVM switch, and two Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system systems. This set of components occupies six outlets in the PDU and 17U of rack space.
  • Page 50 Sample PDU Usage Calculation Express5800/320Ma: Site Planning Guide...

  • Page 51: Appendix A. System Specifications

    System Specifications Figure A-1 shows the front of a pedestal Express5800/320Ma 3.2 GHz or 3.6 GHz systems system, its bezel pulled forward. Figure A-2 shows the rear of a typical pedestal Express5800/320Ma 3.2 GHz system, and...

  • Page 52: Figure A-1. Pedestal System - Front View

    System Specifications Figure A-1. Pedestal System - Front View asys006a Express5800/320Ma: Site Planning Guide...

  • Page 53: Figure A-2. Pedestal Express5800/320Ma 3.2 Ghz Systems - Rear View

    System Specifications Figure A-2. Pedestal Express5800/320Ma 3.2 GHz systems - Rear View asys007 Ports on a PCI adapter in slot 1 System 10/100/1000-Mbps Ethernet ports (4) USB ports (3) VGA (monitor) port Serial (COM) ports (2) Power receptacles (2) VTM 10/100-Mbps Ethernet port (2)

  • Page 54: Figure A-3. Pedestal Express5800/320Ma 3.6 Ghz Systems-Rear View

    System Specifications Figure A-3. Pedestal Express5800/320Ma 3.6 GHz systems- Rear View asys008 PCI slot 3 PCI slot 2 PCI slot 1 System 10/100/1000-Mbps Ethernet ports (4) USB ports (3) VGA (monitor) port Serial (COM) ports (2) Power receptacles (2) VTM 10/100-Mbps Ethernet ports (2)

  • Page 55: Table A-1. Pedestal System Specifications

    System Specifications Table A-1. Pedestal System Specifications Power Input power A-side enclosure: 650W B-side enclosure: 650W Nominal input voltage (AC) 100-230 volts +/- 10% 240V + 6%/-10%; 50/60 Hz Protective earth ground current 3.5 milliamperes maximum for each AC power cord Physical Dimensions of System in a Pedestal Case Height 23.25 in.
  • Page 56 (you can add two full-height PCI adapter slots in each CPU-I/O enclosure with the optional AK533 riser assembly kit) Express5800/320Ma 3.6 GHz and Dual-Core systems : One low-profile PCI adapter slot and two full-height PCI adapter slots operating at 64-bits and 100 MHz, all user-configurable, in each CPU- I ⁄...

  • Page 57: Rack-Mountable System Specifications

    Rack-Mountable System Specifications Rack-Mountable System Specifications Figure A-4 shows the front of a rack-mountable Express5800/320Ma 3.2 GHz, 3.6 GHz and Dual-Core system, mounted in a rack with its bezel pulled forward. The front views of the systems are identical. Figure A-5 shows the rear of a rack-mountable Express5800/320Ma 3.2 GHz system, and...

  • Page 58: Figure A-5. Rack-Mountable Express5800/320Ma 3.2 Ghz System - Rear View

    Rack-Mountable System Specifications Figure A-5. Rack-Mountable Express5800/320Ma 3.2 GHz system - Rear View asys010 PCI slot 1 System 10/100/1000-Mbps Ethernet ports (4) USB ports (3) VGA (monitor) port Serial (COM) ports (2) Power receptacles (2) VTM 10/100-Mbps Ethernet ports (2)

  • Page 59: Figure A-6. Rack-Mountable Express5800/320Ma 3.6 Ghz Or Dual-Core System - Rear View

    Rack-Mountable System Specifications Figure A-6. Rack-Mountable Express5800/320Ma 3.6 GHz or Dual-Core System - Rear View asys011 PCI slot 3 PCI slot 2 PCI slot 1 System 10/100/1000-Mbps Ethernet ports (4) USB ports (3) VGA (monitor) port Serial (COM) ports (2)

  • Page 60: Table A-2. Cabinet Dimensions

    436 lb (197.8 kg) 38U Cabinet Height (including casters) 74 in. (1.9m) Width 27.5 in. (70 cm) Depth 41 in. (1.04m) Weight, empty 344 lb (156 kg) Weight, empty with pallet and shipping container 512 lb (232.2 kg) A-10 Express5800/320Ma: Site Planning Guide...

  • Page 61: Table A-3. Rack-Mountable System Specifications

    Rack-Mountable System Specifications Table A-3. Rack-Mountable System Specifications Power Input power A-side enclosure: 650W B-side enclosure: 650W Nominal input voltage (AC) 100-230 volts +/- 10% 240V + 6%/-10%; 50/60 Hz Protective earth ground current 3.5 milliamperes maximum for each AC power cord Physical Dimensions Height 7.0 in.
  • Page 62 (you can add two full-height PCI adapter slots in each CPU-I/O enclosure with the optional AK533 riser assembly kit) Express5800/320Ma 3.6 GHz and Dual-Core systems: One low-profile PCI adapter slot and two full-height PCI adapter slots operating at 64-bits and 100 MHz, all user-configurable, in each CPU- I ⁄...

  • Page 63: Appendix B. Electrical Circuit And Wiring Information

    “Electrical Power Connectors” on page B-9 Fault Protection Requirements Each enclosure in Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core systems contains internal fault/overload current protection. However, the system relies on the power distribution system at your site for protection against potential faults in the power cords and the wiring in the system base.

  • Page 64: Figure B-1. Star Ground Example

    Figure B-1. Star Ground Example To monitor To Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system Earth reference ground (0V) Express5800/320Ma: Site Planning Guide...

  • Page 65: Figure B-2. Power Input Labeling

    380V AC, Y-, or -source circuit connection, phase-to-neutral. In the diagrams in this appendix, the power inputs for Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system are labeled X and Y, as shown in Figure B-2, to eliminate any ambiguities in the nomenclature.

  • Page 66: Figure B-3. Single-Phase 120-Volts Ac Circuit Connection

    120-volts AC circuit connection. Note that this application requires a single-pole circuit breaker. Figure B-3. Single-Phase 120-Volts AC Circuit Connection Circuit A or B 120V G (PE) 15A Maximum Wall Power Cord G (PE) To power input A or B Express5800/320Ma: Site Planning Guide...

  • Page 67: Figure B-4. Single-Phase 240-Volts Ac Circuit Connection

    Circuit Wiring Diagrams Figure B-4 shows a single-phase 240-volts AC circuit connection. Note that this application requires a single-pole circuit breaker. Figure B-4. Single-Phase 240-Volts AC Circuit Connection Circuit A or B 240V G (PE) Single system: 20A maximum PDU: 30A maximum Wall Power Cord G (PE)

  • Page 68: Figure B-5. Split-Phase 120/240 Volts Ac Circuit Connection

    Figure B-5. Split-Phase 120/240 Volts AC Circuit Connection 240V Circuit A or B 120V 120V G (PE) Single system: 20A maximum PDU: 30A maximum Wall Power Cord G (PE) To power input A or B Express5800/320Ma: Site Planning Guide...
  • Page 69 Circuit Wiring Diagrams ∆ Figure B-6 shows a three-phase 208-volts AC, Y-, or -source circuit connection, which is a phase-to-neutral source connection. Note that the X input on the system can be connected from L1, L2, or L3. This application requires a single-pole circuit breaker. ∆...
  • Page 70 Figure B-7. Three-Phase 208-Volts AC, Y-, or -Source Circuit Connection, Phase-to-Phase 208V 120V 208V 120V Circuit A or B 120V G (PE) Single system: 20A maximum PDU: 30A maximum Wall Power Cord G (PE) To power input A or B Express5800/320Ma: Site Planning Guide...

  • Page 71: Electrical Power Connectors

    To power input A or B Electrical Power Connectors Table B-1 describes the connectors that NEC Solutions (America), Inc. uses to connect Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system and peripheral devices to AC power outlets. Electrical Circuit and Wiring Information...

  • Page 72: Table B-1. Connectors For Ac Power Outlets

    15A, 125 volts AC 2-pole, 3-wire NEMA L6-30 30A, 250 volts AC 2-pole, 3-wire CEE (7) VII 20A, 250 volts AC 2-pole, 3-wire CEI-23-16 16A, 250 volts AC 2-pole, 3-wire SI 32/1971 16A, 250 volts AC 2-pole, 3-wire B-10 Express5800/320Ma: Site Planning Guide...
  • Page 73 Electrical Power Connectors Table B-1. Connectors for AC Power Outlets (Continued) Connector Configuration Rating Description IEC 60309 16-20A, 250 volts AC 2-pole, 3-wire (formerly IEC 309) SABS 16A, 250 volts AC 2-pole, 3-wire 164-1:1992 BS 1363/A 13A, 250 volts AC 2-pole, 3-wire 10A, 250 volts AC 2-pole, 3-wire...
  • Page 74 Electrical Power Connectors Table B-1. Connectors for AC Power Outlets (Continued) Connector Configuration Rating Description GB1002-1996 10A, 250 volts AC 2 pole, 3-wire B-12 Express5800/320Ma: Site Planning Guide...

  • Page 75: Appendix C. Standards Compliance

    Appendix C Standards Compliance Express5800/320Ma systems comply with the electromagnetic interference (EMI), immunity, safety, and noise regulations listed in Tables through C-4. All necessary agency labels are on the system. N O T E S 1. This system must be configured with the components listed and described in the product configuration specifications.

  • Page 76: Table C-1. Emi Standards

    Table C-4. Noise Standards Standard Description Country/Region ISO 9614-2 Acoustics. Determination of Sound Power European Union Levels of Noise Source using Sound Intensity ISO 7779 Measurements of Airborne Noise emitted by European Union Computers and Business Equipment Express5800/320Ma: Site Planning Guide...
  • Page 77 Standards Compliance VCCI Note BSMI Note Standards Compliance...
  • Page 78 Standards Compliance Express5800/320Ma: Site Planning Guide...

  • Page 79: Index

    Index Index- ActiveService Network (ASN). See ASN documentation, ordering, 1-6 AK533 riser assembly kit, A-6, A-12 American Power Conversion. See APC earth reference ground, B-1 Network Management Card EX, 5-2 electrical connectors, B-9 PowerChute Network Shutdown, 5-2 electrical grounding, B-1 qualified UPS, 5-1 electrical wiring, B-1 AS/NZS 3112-1993 connector, B-11...
  • Page 80 1-6 protective earth ground, B-1 Virtual Technician Modules. See VTMs VTMs, site planning, 1-3 racks requirements, 2-1 room requirements, 3-1 wiring, electrical, B-1 SAA/3/15 AS/NZS 3112-1993 connector, B-11 SABS 164-1:1992 connector, B-11 safety regulations, C-2 Index-2 Express5800/320Ma: Site Planning Guide...

Table of Contents