Arinc 552 / Alt 55 Radio Altitude Validity Flag Discretes; Gnd Landing Gear Discrete; Landing Gear Discrete - Honeywell MK V Line Maintenance Manual

Enhanced ground proximity warning systems
Hide thumbs Also See for MK V:
Table of Contents

Advertisement

3.8.1 ARINC 552 / ALT 55 RADIO ALTITUDE VALIDITY FLAG DISCRETES

Three Radio Altitude validity flags may be used by the EGPWS, one for each of the three possible ARINC 552 or
ALT 55 Radio Altimeters inputs.
Type
Validity from ARINC 552 or ALT 55 Radio Altimeter.
Signal Status: Valid or Invalid
Radio Altitude Validity Discrete #1
Radio Altitude Validity Discrete #2
Radio Altitude Validity Discrete #3

3.8.2 GND LANDING GEAR DISCRETE

Type
Supplied by landing gear or landing gear selector handle position-sensitive switch. This input can
be paralleled with, or used exclusively by a Gear Override Switch if an alternate source of Gear
Position is used.
Signal Status: Landing Gear Down or Landing Gear Up
Fault monitoring: Indication of landing gear selected for more than 60 seconds at airspeeds above 290 knots will
result in a gear switch fault which will cause a GPWS INOP indication.
Note: This can be caused either by a gear switch fault or by the Gear Override switch being left in the on position.

Landing Gear Discrete

or Gear Override
3.8.3 +28V LANDING GEAR DISCRETE
Type
Supplied by landing gear or landing gear selector handle position-sensitive switch. This input can
be paralleled with, or used exclusively by a Gear Override Switch if an alternate source of Gear
Position is used.
Signal Status: Landing Gear Down or Landing Gear Up
Fault monitoring: Indication of landing gear selected for more than 60 seconds at airspeeds above 290 knots will
result in a gear switch fault which will cause a GPWS INOP indication.
Note: This can be caused either by a gear switch fault or by the Gear Override switch being left in the on position.
+28 V Landing Gear Discrete
or Gear Override
CAGE CODE: 97896
EGPWS LINE MAINTENANCE MANUAL
Invalid =>
Invalid =>
Invalid =>
Selected =>
Not Selected =>
Selected =>
Not Selected =>
SCALE: NONE
SIZE: A
Level 6 Audio readout
Valid =>
"Radio Altimeter 1 Valid"
"Radio Altimeter 1 Invalid"
Valid =>
"Radio Altimeter 2 Valid"
"Radio Altimeter 2 Invalid"
Valid =>
"Radio Altimeter 3 Valid"
"Radio Altimeter 3 Invalid"
Level 6 Audio readout
"Landing Gear Down"
"Landing Gear Up"
Level 6 Audio readout
"28V Landing Gear Down"
"28V Landing Gear Up"
DWG NO.: 060-4199-180
REV:
G
SHEET 38 of 68

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mk viMk xxiiMk viiMk viii

Table of Contents