Honeywell Tuxedo Touch Series Home Automation System User Manual page 21

Fixed IP Addresses
If the IP Address is not displayed in the lower left-hand corner on the Tuxedo Touch Keypad "Home" screen, you may require a
"Static" (Fixed) IP Address that can be found by accessing your router. Refer to your router instructions for further information.
To access "IP Setup", do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Setup icon and then press the
IP Setup icon.
b Press the button next to Obtain an IP address
)
automatically to de-select it and manually
enter the desired IP Address you want to
assign to the keypad.
c) Enter the "IP Address" by pressing the first set
of 3 zeros ("000") on the screen, and enter the
first three numbers of the IP address on the
"Data Entry Keyboard". Repeat this step until
the complete address has been entered and
press Apply.
2. At your PC, Smart Phone or Tablet Browser:
a) Start your browser and enter your IP Address.
Refer to "Automatic IP Addresses" Step 2 on previous
page.
Account Setup
Account setup provides a browser log-on page for each user (for higher security) when viewing from a web enabled device or PC on
a different sub-net. To set up a user account, do the following:
ICON
To set up a User Account:
1. Press the Account Setup button.
2. Press the User Name field and enter a user name
on the "Data Entry Keyboard"; press OK.
3. Press the "User Password" field and enter a user
password; press OK.
4. Press the Save icon; the new user is displayed on
the screen.
5. Press Apply.
6. To delete a user, press the Delete button next to
that user's information.
Setup (cont'd)
ACTION
ACTION
21
NOTES
Use the Data Entry Keyboard to enter the required information.
•
Use the Shift key for capital letters
•
Use the BS (Backspace) key to make corrections.
•
Press OK
A pop-up window displays the message:
Settings Changed! Remember new settings?
Select Yes to save the settings.
Select No to cancel.
NOTES
Note: Account Setup allows you to add up to 5 users.
Use the Data Entry Keyboard to enter the required information.
•
Use the Shift key for capital letters
•
Use the BS (Backspace) key to make corrections.
•
Press OK
•
Press abc/@#$ to switch between letters and symbols.
A pop-up window displays the message:
Settings Changed!
Remember new settings?
Select Yes to save the settings.
Select No to cancel.