How To Clear Bypassed Zones; How To Disarm The System - Honeywell Tuxedo Touch Series Home Automation System User Manual

ICON
6. Press the BACK icon to return to the
"Arming" screen.

How to Clear Bypassed Zones

A bypassed zone is automatically unbypassed when you disarm the system. If a zone is bypassed, you can remove the bypass as
follows:
ICON
1. Press the SHOW ZONES icon.
2. Press the CLEAR BYPASSES icon.
3. Enter your 4-digit user code. The "More
Choices" screen is displayed showing the
system as Ready to Arm.

How to Disarm the System

IMPORTANT: If you return to your home or business and the main burglary sounder is on, DO NOT enter the premises, but call
the police from a nearby safe location. If you return to your home or business after an alarm has occurred and the main sounder
has shut itself off, the keypad beeps rapidly upon entering, indicating that an alarm has occurred during your absence. LEAVE
IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.
The system may be disarmed using either of two methods. One method is employed when you enter the premises and the other is
when you have been in the premises with the system armed (i.e., Stay and Night arming modes).
To disarm the system when entering the premises:
The keypad automatically displays the Entry Delay Active screen when you enter the premises.
ICON
1. Enter your 4-digit user code.
To disarm the system when already in the premises:
ICON
1. Press the Disarm icon.
2. Enter your 4-digit user code.
Security (cont'd)
ACTION
ACTION
ACTION
ACTION
NOTES
The "More Choices" screen is displayed showing the system status as Ready-
Bypass.
NOTES
While the keypad is requesting and receiving the zone data from the control
panel, the screen displays "Please Wait!". Then the zones, along with their
current status, are displayed.
Note: If the system is armed and you unbypass a zone, it disarms the
system. If zones are still faulted (not ready) the system will indicate the
status as "Not Ready Fault".
NOTES
The partition is disarmed and the "Arming" screen is displayed showing the
system as Ready to Arm.
Note: If you have a commercial system and a time window has been defined
for when you may disarm the system, the system does not disarm if you are
outside that time window.
NOTES
13