Audio Set Menu - Sony HVR-M35U Operating Instructions Manual

AUDIO SET menu

Icon/Menu Submenu
AUDIO SET AUDIO MODE
(page 27)
AUDIO LOCK
JOG AUDIO
(page 42)
AGC CH1,2
(page 28)
AGC CH3,4
(page 28)
Setting
Selects the audio mode.
BFS32K : Switches the audio mode to 4-channel mode (12-bit mode).
FS48K : Switches the audio mode to 2-channel mode (16-bit mode). (This setting
records the sound in all audio ranges, providing a high-quality sound
recording.)
Notes
• You can set this menu when recording in DV format only.
• When signals are input from the
recorded is the same as that of the input signals.
• Recording performs automatically in [FS48K] mode in HDV format.
• You cannot change the current setting during recording.
• Noise may occur at the instant you switch the audio mode.
• When dubbing a sound source in DVCAM, select [FS32K].
BUNLOCK MODE :Records the sampling clocks of audio and video independently. This
mode applies to a consumer DV tape.
LOCK MODE : Synchronizes the sampling clocks of the audio and video for recording.
This setting is effective for digital processing and performs a clean
splice during the audio editing process.
Notes
• You can set this menu when recording in DV (SP) format only.
• When recording in HDV or DVCAM format, the menu is set to [LOCK MODE].
• During i.LINK input, the same setting as that of the input signal is selected, regardless of
this setting.
Selects either to turn the sound output on or off when the tape is played at a speed other
than normal. (Available in DVCAM/DV format only.)
BOFF : Does not output the sound when playing a tape at a speed other than
normal.
ON : Outputs the sound when playing a tape at a speed other than normal.
Notes
• When a tape recorded in HDV format is played back, the sound cannot be output in various
speeds.
• Even if you have set this item to ON, the sound may not be output or may be interrupted
depending on the recording format or tape conditions.
Switches either to link the AGC (Auto Gain Control) between channel 1 and 2, or to separate
it.
BSEPARATE : Sounds of channels 1 and 2 are not linked.
LINKED : Sounds of channels 1 and 2 are linked.
Notes
• This setting is not effective during i.LINK input.
• The [LINKED] setting is effective only when the AUDIO INPUT switch on the front panel is
set to AUTO.
Switches either to link the AGC (Auto Gain Control) between channel 3 and 4, or to separate
it.
BSEPARATE : Sounds of channels 3 and 4 are not linked.
LINKED : Sounds of channels 3 and 4 are linked.
Notes
• This setting is not effective during i.LINK input.
• The [LINKED] setting is effective only when the AUDIO INPUT switch on the front panel is
set to AUTO.
HDV/DV jack, the audio mode of the signals to be
Chapter 5 Adjusting and Setting Through Menus
79