Loading Continuous Forms - Fujitsu DL3750+/3850+ User Manual

PAPER HANDLING
3-10

Loading Continuous Forms

This section explains how to use continuous forms. The tractor unit pushes
continuous forms.
To load continuous forms paper:
1. Make sure that the printer is turned on. Remove any single- sheet
paper from the printer.
2. If necessary, readjust the paper thickness lever for continuous forms.
(See the section Adjusting for Paper Thickness earlier in this
chapter.)
No. of Copies Setting
1 1 to 2
2 to 3 2 to 3
4 3 to 4
5 4 to 5
Paper thickness lever setting
3. Move the paper select lever to the rear of the printer.
Continuous forms side
Preparing to load continuous forms paper
Paper thickness lever
User's Manual