Resetting Defaults; Resetting Power-On Defaults; Resetting Factory Defaults; Resetting Factory Defaults In Menu1 And Menu2 - Fujitsu DL3750+/3850+ User Manual

RESETTING DEFAULTS

User's Manual
This section describes how to reset the printer's power-on defaults, all of the
factory defaults, or the factory defaults only for MENU1 and MENU2.

Resetting Power-On Defaults

Power-on defaults are the settings saved in the printer's permanent memory.
The defaults are enabled whenever you turn the printer on. The easiest way
to reset the power-on defaults is to turn the printer off and then on again.
This method is useful if you have made changes in setup mode that you do
not want to save.

Resetting Factory Defaults

Factory defaults are those settings preselected at the factory. For a list of the
printer's factory defaults, see the section Printing a List of Selected
Options earlier in this chapter. To reset the factory defaults for all functions,
proceed as follows:
1. Turn off the printer.
2. While pressing the MENU, TEAR OFF, and ONLINE buttons, turn
on the printer. Continue to press all three buttons until the printer
beeps.
The factory defaults are now reset.

Resetting Factory Defaults in MENU1 and MENU2

This method resets factory defaults for MENU1 and MENU2 options, listed
in Table 5.3, but does not reset the printer hardware, print position adjust-
ment, and configuration options. To reset the factory defaults in MENU1
and MENU2, proceed as follows:
USING SETUP MODE
5-49