Selecting A Programmable Fill Stitch - Brother PEDESIGN 5.0 Instruction Manual

Step 11

Selecting a Programmable Fill Stitch

You are going to see how to select a special stitch pattern (fill stitch) created with the Programmable
Stitch Creator application, how to change its settings and how to apply it as the region stitch for the rays,
which you will draw in Step 12. Stitch patterns are arranged in a tile-like manner within the selected
regions, creating very decorative fill stitches.
1
Select
2
Click
Sew – Sewing Attribute Setting
You can also click on the Toolbar button shown hereafter.
3
Change the stitch pattern size. Select a width and height of
"up" arrow.
NOTE:
As soon as you click an arrow in this dialog, an illustration of the stitch pattern as well as the type
of setting you are selecting are displayed in the other preview window of the dialog. You can see
how each click on an arrow affects the pattern.
You may also type in a value. In that case however, you cannot preview the setting immediately as
you set it.
in the
Region sew type
on the menu bar to open the
selector.
Sewing Attribute Setting
N Select
in the
Pattern
gory.
N Click
Select Pattern
N Select the path Program Files/Version 5.0/Pat-
tern.
The Pattern folder contains the programmable
stitch files. These files have the extension
The dialog shown hereafter now allows
Browse
you to preview and browse through the existing
files.
pas
Note:
"*.pas" files are patterns for
"*.pmf" files are patterns for
N Browse through the illustrated stitches and
click on the
pat 7
highlighted.
N Either double-click the illustration or click
select that stitch. The dialog closes and the
selected stitch can now be previewed in the
Sewing Attribute Setting
10.0 mm (3/8 inch)
cate-
Programmable Fill
to open the
Browse
Programmable Fill.
.
Motif
illustration, which is then
dialog.
by clicking on the
dialog.
dialog.
.
pas
to
OK
43