Adjusting Fill Settings - Brother Pacesetter BES Lettering Instruction Manual

74 Pacesetter BES Lettering
Instruction Manual

Adjusting Fill Settings

Within the properties panel, the Fill area allows you to
customize the parameters used by Pacesetter BES Lettering
when it creates the stitches that will fill the text design. You
have the option to add a pattern type and change the text
object's density settings.
Choosing a Fill Pattern
When you install Pacesetter BES Lettering, a wide variety of
Standard and Carved patterns are installed along with the
software. You can select which Standard or Carved pattern to
use in the Properties box.
To choose the fill pattern:
1 Select the Lettering segment.
2 In the Fill area of the Properties box, in the field labelled Fill
Type, select either Standard or Carved.
3 Click on the down arrow on the right of the Pattern field to
display a drop-down list of patterns.
4 You see a list of patterns; the patterns that are displayed
depend on the type of fill you chose in step 2).