System - D-Link DNR-326 User Manual

Section 3 - Configuration
Users can save the NVR configuration to a file and restore it when necessary. Occassionally, restarting the NVR can keep the
system running smoothly. Reset the NVR to restore all configurations to factory default.
Restart: If the NVR is malfunctioning or crashes
unexpectedly, click the Restart button on the
NVR. Restarting the NVR will take about one and
a half minutes.
Default: This will reset all configurations to factory
default.
Shutdown: This will shut down the NVR.
Save All the configurations can be saved as a file to
Configuration: the specified location. Click the Save button to
save the file.
Load User can restore the configuration file if they
Configuration have reset the system to the factory default
File: file. Click the Browse button to select the
configuration file and restore it by clicking the
Load button.
Idle Time: When the administrator enters the Setup
pages, except the Live Video and Playback
pages, the NVR will keep track of the idle time
when there is no action taken by the user.
After a certain period of time, it will then force
the user to log out and request the user to log
in again for security concerns. Change the idle
time period here.
D-Link DNR-326 User Manual

System

35