Before You Begin; System Requirements; Hardware Overview; Package Contents - D-Link DIR-825 Quick Installation Manual

Before You Begin

This Quick Installation Guide gives you step-by-
step instructions for setting up your DIR-825
AC1200 Wi-Fi Gigabit Router and connecting
it to your DWP-812KT LTE Outdoor CPE. The
model you have purchased may appear slightly
different from the one shown in the illustrations.
For more detailed information about the router,
please refer to the User Manual.

Package Contents

This package should include the following items:
• DIR-825 AC1200 Wi-Fi Gigabit Router
• DWP-812KT LTE Outdoor CPE
• Power adapter (DIR-825)
• Power adapter (DWP-812KT)
• PoE injector (DWP-812KT)
• 10 meter Ethernet cable
• 2 x 1 meter Ethernet cable
• Mounting bracket
• 4 x M6 screw
• 4 x M3 screw
• 2 x U-bolt clamp
• Quick Installation Guide
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Installing and mounting the DWP-812KT and
connecting it to the DIR-825 requires the use
of a drill with a 4 mm drill bit and a Phillips
screwdriver.
Note: Using a power supply with a different
voltage than the one recommended for the
devices will cause damage and void the
warranty for these products.
Quick Installation Guide

System Requirements

• Safari 8, Google Chrome 48, Microsoft
Internet Explorer 10, Microsoft Edge
20.10240, Mozilla Firefox 44, or Opera 35
• A PC with an Ethernet or Wi-Fi adapter

Hardware Overview

DIR-825 Front Panel LED Indicators
1 3
2
Figure 1: DIR-825 Front Panel LED Indicators
# LED
Indicates whether the DIR-825 is
1 Power
receiving power.
Off
Slow
Blinking
2 Internet
Solid
Green
Fast
Blinking
Indicates whether the router is
3 LAN
connected to devices on its LAN ports.
2.4G/5G
Indicates whether the 2.4 GHz and 5
4
WLAN
GHz interfaces are enabled or disabled.
5 WPS
Indicates whether WPS is enabled.
Indicates whether a USB storage
6 USB
device is connected to the DIR-825.
Table 1: DIR-825 Front Panel LED
Indicator Descriptions
4
5 6
Description
No Ethernet cable attached.
Cable attached, but no
Internet connection.
Active connection; no data
is being transferred.
Active connection; data is
currently being transferred.
1