Revision History And System Requirement; Upgrade Instructions; Upgrade Using Cli (Via Telnet) - D-Link DES-1210-08P Manual

Revision History and System Requirement:

Firmware Version
Runtime: v2.03.B016
Boot: 1.00.005
Runtime: v2.03.B015
Boot: 1.00.005
Runtime: v2.03.B014
Boot: 1.00.005
Runtime: v2.03.B013
Boot: 1.00.005
Runtime: v2.03.001
Boot: 1.00.005
Runtime: v2.02.002
Boot: 1.00.005
Runtime: v2.01.002
Boot: 1.00.004
Runtime: v2.00.011
Boot: 1.00.004

Upgrade Instructions:

D-Link Smart Switches support firmware upgrade via TFTP server. You can download the firmware
from D-Link web site http://tsd.dlink.com.tw, and copy the downloaded firmware to the TFTP
server folder. Please make sure that the TFTP server is accessible from the switch via networks.

Upgrade using CLI (via Telnet)

1. Make sure the network connection between the switch and PC is active.
2. Use software that supports telnet, for example, HyperTerminal or Telnet command in Microsoft
Windows, to connect to the switch. If you are using Telnet command, type the command followed
by the switch IP address, eg. telnet 10.90.90.90.
3. The logon prompt will appear.
The switch will prompt the user to enter his/her username and password. It should be noted that
upon the initial connection, both the default user name and password are admin.
To upgrade the switch firmware, execute the following command:
Command
download{firmware_fromTFTP
tftp://ip-address/filename | cfg_fromTFTP
DES-1210-08P Firmware Release Notes
Date Model
26-Aug.-14 DES-1210-08P
11-Feb.-14 DES-1210-08P
25-Oct.-13 DES-1210-08P
25-Oct.-13 DES-1210-08P
21- Aug.-12 DES-1210-08P
21- Aug.-12 DES-1210-08P
22- Feb.-11 DES-1210-08P
13-Sep.-10 DES-1210-08P
2
Hardware Version
A1
A1
A1
A1
A1
A1
A1
A1
Function
Download firmware file from the TFTP
server to the switch.