Appendix B - Cables And Connectors; Ethernet Cable - D-Link DGS-3620-28SC-EI Hardware Installation Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Hardware Installation Guide
10G Ports
Appendix B – Cables and Connectors

Ethernet Cable

When connecting the Switch to another switch, a bridge or hub, a normal cable is necessary. Please review these
products for matching cable pin assignment. The following diagrams and tables show the standard RJ-45 connector
and their pin assignments.
1 Optional
2 Optional
3 Optional
4 Reserved
8. Follow the PSE pin out standard. For an alternative solution, send the power over
pin1,2,3,6 of 8 wires. Use CAT3 ~ 6A UTP cable for 802.3af or CAT5e~ 6A UTP cable for
802.3at
9. DGS-3620-28PC, DGS-3620-52P works with all D-Link 802.3af and 802.3at capable
devices, and works with all non-802.3af and non-802.3at capable D-Link Access Points,
IP Cams and IP phones via the DWL-P50.
SFP+ Transceivers Supported:
- DEM-431XT:10GBASE-SR SFP+ Transceiver 80m: OM1 & OM2 MMF 300m: OM3
MMF
- DEM-431XT-DD:10GBASE-SR SFP+ Transceiver 80m: OM1 & OM2 MMF 300m: OM3
MMF
- DEM-432XT:10GBASE-LR SFP+ Transceiver 10km
- DEM-432XT-DD:10GBASE-LR SFP+ Transceiver 10km
- DEM-433XT:10GBASE-ER SFP+ Transceiver 40km
- DEM-433XT-DD:10GBASE-ER SFP+ Transceiver 40km
- DEM-434XT:10GBASE-ZR SFP+ Transceiver 80km
- DEM-435XT:10GBASE-LRM SFP+ Transceiver 220m: OM1 & OM2 MMF, 300m: OM3
MMF
- DEM-435XT-DD:10GBASE-LRM SFP+ Transceiver 220m: OM1 & OM2 MMF, 300m:
OM3 MMF
- DEM-436XT-BXU:10GBASE-LR BiDi SFP+ Transceiver 20km TX: 1270nm, RX:
1330nm
- DEM-436XT-BXD:10GBASE-LR BiDi SFP+ Transceiver 20km TX: 1330nm, RX:
1270nm
SFP Tranceivers Supported
- DEM-310GT (1000Base-LX, Single-mode, 10km)
- DEM-311GT (1000ase-SX, Mutli-mode, 550m)
- DEM-312GT2 (1000Base-SX, Multi-mode, 2km)
- DEM-314GT (1000BASE-LHX, Single-mode, 50km)
- DEM-315GT (1000BASE-ZX, Single-mode, 80km)
- DEM-330T/R (1000BASE-BX, WDM transceiver, Single-Mode 10km)
- DEM-331T/R (1000BASE-BX, WDM transceiver, Single-Mode 40km)
SFP+ Direct Attach Cable Supported:
- DEM-CB100S-10-GbE SFP+1m Direct Attach Cable
- DEM-CB300S-10-GbE SFP+3m Direct Attach Cable
- DEM-CB700S-10-GbE SFP+7m Direct Attach Cable
3.84W
6.49W
12.95W
29.5W
45