Appendix Section; Appendix A - Technical Specifications; General; Physical And Environmental - D-Link DGS-3620-28SC-EI Hardware Installation Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Hardware Installation Guide
Appendix
Appendix A – Technical Specifications

General

Feature
Standards
Protocols
Data Transfer Rates:
Ethernet
Fast Ethernet
Gigabit Ethernet
10 Gigabit Ethernet
Stacking Topology
Network Cables

Physical and Environmental

Feature
Internal Power Supply
Optional Redundant
Power Supply
Fans
Power Consumption
Detailed Description
IEEE 802.3 compliance
IEEE 802.3u compliance
Support Full-Duplex operations
IEEE 802.3x Flow Control support for Full-Duplex mode
IEEE 802.3ab compliance
IEEE 802.3af compliance (DGS-3620-28PC & DGS-3620-52P only)
IEEE 802.3at compliance (DGS-3620-28PC & DGS-3620-52P only)
IEEE 802.3z compliance
IEEE 802.3ae compliance
IEEE 802.3aq compliance
IEEE 1588
CSMA/CD
Half-duplex
10 Mbps
100Mbps
-------------
-------------
Duplex Ring, Duplex Chain
Cat.5 Enhanced for 1000BASE-T
UTP Cat.5, Cat. 5 Enhanced for 100BASE-TX
UTP Cat.3, 4, 5 for 10BASE-T
EIA/TIA-568 100-ohm screened twisted-pair (STP)(100m)
Detailed Description
AC input for DGS-3620-28TC/28SC/28PC/52T/52P
DC input for DGS-3620-28TC-DC/28SC-DC
One connector in back to install optional external RPS. When internal power fails, the
optional external RPS will take over all the power supply immediately and automatically.
Supported RPS model: DPS-500 (For DGS-3620-28TC/,DGS-3620-28SC,DGS-3620-
52T) - DPS-700 (For DGS-3620-28PC/52P)
DGS-3620-28TC-DC/28SC-DC does not support RPS
The IC Sensor detects the temperature on the switch automatically, and adjusts the
speed.

DGS-3620-28TC=50.8W

DGS-3620-28TC-DC=51.5W

DGS-3620-28SC=60.3W

DGS-3620-28SC-DC=65.5W

DGS-3620-28PC=478.0W

DGS-3620-52T=81.0W
Full-duplex
20Mbps
200Mbps
2Gbps
20Gps
-
-36Vdc ~ -72Vdc
42
-
100-240 VAC, 50/60Hz